12th International Conference on Zinc & Zinc Alloy Coated Steel Sheet - GALVATECH 2021

Name: 12th International Conference on Zinc & Zinc Alloy Coated Steel Sheet - GALVATECH 2021
Start: 2021-06-20T08:00:00+02:00
End: 2021-06-24T18:00:00+02:00
Location: Virtuel Conference

21-23 June 2021 Virtual Conference

Virtuel Conference

Europe/Vienna timezone

Thank you very much for your participation!

Support

Author List

Ruslan Adigamov
- Co-author in OPTIMAL CONTENT OF ALUMINUM IN ALUMINUM-ZINC ALLOY IN HOT-DIP COATING ON THE STEEL STRIP
Soroush Aghaeian
- Author in KINETICS OF WÜSTITE FORMATION IN SHORT TIME ON PURE IRON IN THE GAS MIXTURE OF CO2+CO OR H2O+H2
Masoud Ahmadi
- Author in MECHANICAL PROPERTIES AND CRACKING BEHAVIOR OF HOT-DIP GALVANIZED ZnAlMg COATINGS
Andrea Alessandrini
- Author in EFFICIENT AND EFFECTIVE OPERATION OF A HOT DIP GALVANIZING LINE
Eric Almquist
- Author in PRODUCER EXPERIENCES AND ADVANCEMENTS WITH AN ONLINE, NON-CONTACT SURFACE CLEANLINESS MONITOR
Nauwfel AMIMI
- Co-author in JET VAPOUR DEPOSITION: A TECHNICAL ECONOMIC ALTERNATIVE TO ELECTRO-GALVANIZING FOR Zn COATINGS OF FUTURE STEELS
Kais Ammar
- Co-author in MICROSTRUCTURE AND TEXTURE ANALYSIS OF A NEAR-EUTECTIC Zn-Al COATING DEPOSITED ON STEEL BY HOT-DIP GALVANIZING
Chawki Ammarcha
- Co-author in HOW MODEL PREDICTIVE CONTROL ENHANCES STRIP TEMPERATURE REGULATION
Satoru Ando
- Co-author in ANALYSIS OF COSMETIC CORROSION BEHAVIOR BY IN-SITU OBSERVATION IN WET AND DRY CONDITIONS
- Co-author in ATMOSPHERIC CORROSION BEHAVIOURS OF AUTOMOTIVE STEEL SHEETS EXPOSED IN EAST AND SOUTH-EAST ASIA REGIONS
Gerhard Angeli
- Co-author in CFD-DPM MODELLING AND ANALYSIS OF DROSS PARTICLE DYNAMICS IN HOT-DIP GALVANIZING BATHS
- Co-author in FLOW PATTERN ANALYSIS INSIDE AN IMMERSING SNOUT WITH A PARAMETIC SIMULATION MODEL
Kai Ankermann
- Co-author in SCHEDULING SOLUTIONS SUPPORT SUSTAINABLE PRODUCT QUALITY OF GALVANIZED COILS BY PROVIDING PRODUCTION SCHEDULES IN REPEATABLE QUALITY
Thomas Antretter
- Co-author in NUMERICAL MODEL FOR PREDICTING LIQUID METAL CRACKING DURING RESISTANCE SPOT WELDING OF ADVANCED HIGH STRENGTH STEELS
- Co-author in SCANNING ELECTRON MICROSCOPE INVESTIGATION ON ZINC INDUCED CRACKS OF COATED PRESS HARDENED COMPONENTS
Jean Michel Arbiol
- Co-author in NON STICKING FURNACE ROLLS FOR STEEL PRODUCTS TO IMPROVE SERVICE LIFE AND PRODUCT QUALITY IN CONTINUOUS ANNEALING AND GALVANIZING LINES: PRELIMINARY STUDY ON CHEMICAL INTERACTIONS AND PICKUP MECHANISM
Andreas Argårds SSAB
- Co-author in NEWEST GENERATION OF METRIS ADVANCED FURNACE CONTROL FULFILS HIGHEST QUALITY DEMANDS
Selim Arikan Smart Steel Technologies
- Author in INSPECTING SURFACE QUALITY OF GALVANIZED STEEL BY DEEP LEARNING
Martin Arndt
- Author in NANOSCALE INVESTIGATION OF GRAIN BOUNDARY WETTING AND MICRO CRACKS OF PRESS HARDENED GALVANIZED 20MnB8 STEEL
Carlos Arroyave
- Author in CATASTROPHIC BEHAVIOR OF GALVANIZED STEEL EXPLAINED BY FUNDAMENTALS OF CORROSION SCIENCE
Barbara Arz
- Co-author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Ridwan Setiawan Asep
- Co-author in ATMOSPHERIC CORROSION BEHAVIOURS OF AUTOMOTIVE STEEL SHEETS EXPOSED IN EAST AND SOUTH-EAST ASIA REGIONS
Michael Auinger
- Co-author in UNDERSTANDING THE EVOLUTION OF SURFACE OXIDES UPON DUAL PHASE STEELS DURING AN ANNEALING CYCLE
Eduard Paul Mattheus Bakker
- Co-author in FEEDING TECHNOLOGY FOR A CONTINUOUS PVD COATING LINE
Rohit Bardapurkar
- Author in RAPID DESIGN OF NEW Zn-Mg-Al-Sn COATINGS WITH LOW MELTING POINT FOR AUTOMOTIVE SHEET APPLICATIONS VIA MACHINE LEARNING
Nabil D. Bassim
- Co-author in ON THE ORIGIN OF MICRO-CRACKING IN ZINC COATED PRESS HARDENED STEELS
Coline Beal
- Co-author in NUMERICAL MODEL FOR PREDICTING LIQUID METAL CRACKING DURING RESISTANCE SPOT WELDING OF ADVANCED HIGH STRENGTH STEELS
Peter Beentjes
- Co-author in AN INNOVATIVE GI WITH IMPROVED GALLING AND SURFACE PROPERTIES FOR EXPOSED AUTOMOTIVE APPLICATIONS
- Co-author in SELECTIVE OXIDATION IN A BAKE HARDENING STEEL FOR DFF - RTF ANNEALING CYCLES
Frank Beier
- Co-author in ON THE REDUCTION OF TEMPERATURE GRADIENTS WITHIN AlSi-COATED BLANKS WITH NON-CONSTANT SHEET THICKNESS FOR HOT PRESS FORMING APPLICATION
YACINE BENLATRECHE
- Co-author in COMPARATIVE ASSESSMENT OF GI AND GA COATED AHSS LME SENSITIVITY DURING SPOT WELDING
Julien BENOIT
- Co-author in HDG POT PRODUCTIVITY
Kazi Mahmudul Haque Bhadhon
- Author in EFFECT OF PROCESS ATMOSPHERE DEW POINT AND MINOR Sn ADDITION ON THE SELECTIVE OXIDATION DURING INTERCRITICAL ANNEALING OF A MEDIUM-Mn THIRD GENERATION ADVANCED HIGH STRENGTH STEEL
Diptak Bhattacharya
- Author in QUANTITATIVE ASSESSMENT OF THE INFLUENCE OF STARTING MICROSTRUCTURE ON THE LIQUID METAL EMBRITTLEMENT SUSCEPTIBILITY OF 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
Olivier Bichler
- Co-author in SIAS® 4.0 - THE NEXT GENERATION OF AUTOMATIC SURFACE INSPECTION SYSTEM USING CONVOLUTIONAL NEURON NETWORK FOR DETECTION AND CLASSIFICATION OF SURFACE DEFECTS
Max Biegler Fraunhofer IPK
- Author in APPLICATION-ORIENTED AVOIDANCE OF LIQUID METAL EMBRITTLEMENT DURING RESISTANCE SPOT WELDING OF ZINC-COATED ADVANCED HIGH STRENGHT STEELS
Raphaël Biland
- Author in FIVES’ EYERON™, ALL-IN-ONE QUALITY MANAGEMENT SOFTWARE
Yannick BINET
- Co-author in HDG POT PRODUCTIVITY
Frances Bleich
- Author in CHALLENGINGS IN GALVANNEALING AHSS AT AN INDUSTRIAL HOT DIP GALVANIZING LINE
Marc Blumenau
- Co-author in NON STICKING FURNACE ROLLS FOR STEEL PRODUCTS TO IMPROVE SERVICE LIFE AND PRODUCT QUALITY IN CONTINUOUS ANNEALING AND GALVANIZING LINES: PRELIMINARY STUDY ON CHEMICAL INTERACTIONS AND PICKUP MECHANISM
Christoph Böhne Universität Paderborn
- Author in APPLICATION-ORIENTED AVOIDANCE OF LIQUID METAL EMBRITTLEMENT DURING RESISTANCE SPOT WELDING OF ZINC-COATED ADVANCED HIGH STRENGHT STEELS
Goo BongJoo HYUNDAI STEEL COMPANY
- Co-author in FAST AND NON-DESTRUCTIVE METHOD FOR PHASE QUANTIFICATION IN ZINC ALLOYED COATED STEEL SHEET
Laurie Bonhomme
- Co-author in THROUGH-PROCESS OPTIMIZATION (TPO) - A MODERN APPROACH TO RAPID PRODUCT DEVELOPMENT
Louis Bordignon
- Author in GALVANIZING OF TRIP-Si STEELS
- Author in NON STICKING FURNACE ROLLS FOR STEEL PRODUCTS TO IMPROVE SERVICE LIFE AND PRODUCT QUALITY IN CONTINUOUS ANNEALING AND GALVANIZING LINES: PRELIMINARY STUDY ON CHEMICAL INTERACTIONS AND PICKUP MECHANISM
Christopher K. H. Borg
- Co-author in RAPID DESIGN OF NEW Zn-Mg-Al-Sn COATINGS WITH LOW MELTING POINT FOR AUTOMOTIVE SHEET APPLICATIONS VIA MACHINE LEARNING
Jan Bottema
- Co-author in AN INNOVATIVE GI WITH IMPROVED GALLING AND SURFACE PROPERTIES FOR EXPOSED AUTOMOTIVE APPLICATIONS
Amarante Bottger
- Co-author in KINETICS OF WÜSTITE FORMATION IN SHORT TIME ON PURE IRON IN THE GAS MIXTURE OF CO2+CO OR H2O+H2
Sergey Bragin
- Author in THROUGH-PROCESS OPTIMIZATION (TPO) - A MODERN APPROACH TO RAPID PRODUCT DEVELOPMENT
Johannes Brask
- Co-author in CHARACTERIZATION OF RESIDUAL STRESSES AT SHEARED, MILLED AND LASER CUT EDGES IN MARTENSITIC STEELS
Mark Bright
- Author in THE MODIFICATION PROCESS OF THE DROSS BUILD-UP STRUCTURE ON SUBMERGED HARDWARE IN Zn-Al AND Zn-Al-Mg BATHS
- Co-author in A SIMPLE MODEL TO ESTIMATE AND TRACK THE WEAR RATE OF POT BEARINGS
- Co-author in OFFLINE SIMULATION OF GALVANISING BATH JOURNAL BEARINGS AS A COST EFFECTIVE SOLUTION TO IMPROVE LINE PERFORMANCE AND MITIGATE RISK
Myriam Brochu
- Co-author in INFLUENCE OF INTERCRITICAL ANNEALING CYCLES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DP980 ADVANCED HIGH-STRENGTH STEEL
MAXIME BROSSARD
- Co-author in COMPARATIVE ASSESSMENT OF GI AND GA COATED AHSS LME SENSITIVITY DURING SPOT WELDING
Huntley Brown Hatch Ltd
- Author in THE EVOLUTION OF COATING CONTROL SYSTEMS AS THE NEED FOR NEW COATED PRODUCTS EXPANDS
Fritz Brühl
- Co-author in HOT-DIP GALVANIZING LINES - CHALLENGES AND SOLUTIONS FOR THE INDUSTRIAL PRODUCTION OF COATED 3rd GEN AUTOMOTIVE STEELS
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Jean-Marie Buchlin
- Author in MULTILAYER ANGULAR ROLL MODEL FOR ONLINE CONTINUOUS CONTROL OF GALVANIZING LINES DRIVEN BY FURNACE MATHEMATICAL MODEL
- Co-author in EXPERIMENTAL AND NUMERICAL STUDY OF GAS JET COOLING AT HIGH REYNOLDS NUMBER
Dominik Büschgens Departement for Industrial Furnaces and Heat Engineering / RWTH Aachen University
- Author in INCREASING LIFETIME OF METALLIC RADIANT TUBES IN VERTICAL GALVANIZING LINES
Brecht Caekaert
- Author in ArcelorMittal GENT PRODUCES 3rd GEN. AHSS INCL. Q&P ON THE UNIQUE ANNEALING FURNACE FROM ANDRITZ
Houssem Eddine Chaieb
- Author in MICROSTRUCTURE AND TEXTURE ANALYSIS OF A NEAR-EUTECTIC Zn-Al COATING DEPOSITED ON STEEL BY HOT-DIP GALVANIZING
Anirban Chakraborty
- Author in EFFECT OF STEEL SUB-SURFACE STRUCTURE ON MECHANICAL PROPERTIES OF GALVANIZED 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
- Author in EVALUATION OF INITIATION AND PROPAGATION OF LME CRACKS ON THE GALVANIZED 3G-AHSS USING INTERRUPTED RESISTANCE SPOT-WELDING METHOD
Daniel CHALEIX
- Author in JET VAPOUR DEPOSITION: A TECHNICAL ECONOMIC ALTERNATIVE TO ELECTRO-GALVANIZING FOR Zn COATINGS OF FUTURE STEELS
Chann Cheng
- Co-author in AHSS SURFACE OXIDE PHASE FORMATION DURING ANNEALING AND PREDICTING THEIR TYPE USING GIBBS ENERGY MINIMIZATION (GEM) THERMODYNAMIC PRINCIPLE
Chann Cheng
- Co-author in CHALLENGINGS IN GALVANNEALING AHSS AT AN INDUSTRIAL HOT DIP GALVANIZING LINE
Andrea Chierichetti
- Co-author in NON STICKING FURNACE ROLLS FOR STEEL PRODUCTS TO IMPROVE SERVICE LIFE AND PRODUCT QUALITY IN CONTINUOUS ANNEALING AND GALVANIZING LINES: PRELIMINARY STUDY ON CHEMICAL INTERACTIONS AND PICKUP MECHANISM
Zahar Chikishev
- Author in INSPECTING SURFACE QUALITY OF GALVANIZED STEEL BY DEEP LEARNING
Chris Childs
- Author in Next Generation EDT Technology
Jung-Wook Cho
- Co-author in ENHANCEMENT OF HOT DIP GALVANIZING ON AS-CAST HIGH-Mn STEEL BY FABRICATION OF FUNCTIONALLY GRADED MULTILAYERS THROUGH LASER CLADDING OF LOW CARBON STEEL
Lawrence Cho
- Co-author in QUANTITATIVE ASSESSMENT OF THE INFLUENCE OF STARTING MICROSTRUCTURE ON THE LIQUID METAL EMBRITTLEMENT SUSCEPTIBILITY OF 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
Won-Tae Cho
- Co-author in ENHANCEMENT OF HOT DIP GALVANIZING ON AS-CAST HIGH-Mn STEEL BY FABRICATION OF FUNCTIONALLY GRADED MULTILAYERS THROUGH LASER CLADDING OF LOW CARBON STEEL
Yeong Geun Cho
- Co-author in THE EFFECT OF Si ADDITION ON Zn-ASSISTED LIQUID METAL EMBRITTLEMENT IN 22MnB5 PRESS HARDENING STEEL
Du-Youl Choi
- Co-author in EFFECT OF Zn-COATING PROCESS ON LIQUID METAL EMBRITTLEMENT OF TRIP STEEL
SO YOUNG CHOI
- Co-author in INFLUENCE OF SURFACE ROUGHNESS OF FULL HARD STEEL ON SPANGLE OF GALVANIZED STEEL AND ACTUAL APPLICATION RESULTS
Marc Choquet
- Author in IN-LINE SEAM WELD INSPECTION USING LASER-ULTRASONICS: RESULTS FROM AN INDUSTRIAL TRIAL
- Co-author in IN-LINE BATH CHEMISTRY MONITORING: REVOLUTIONARY RELIABILITY OF THE NEW DIODE-BASED LASER INDUSTRIAL LIBS SENSOR
Colin Commandeur
- Co-author in FEEDING TECHNOLOGY FOR A CONTINUOUS PVD COATING LINE
Christian Commenda
- Co-author in NANOSCALE INVESTIGATION OF GRAIN BOUNDARY WETTING AND MICRO CRACKS OF PRESS HARDENED GALVANIZED 20MnB8 STEEL
Beril Corlu
- Co-author in ZnAlMg METALLIC COATINGS IN HARSH ENVIRONMENTS: A COMPARATIVE AND CHALLENGING STUDY
Gilles CORNEC
- Author in CELES ECOTRANSFLUX™, A DISRUPTIVE TECHNOLOGY FOR HEATING GEN3 AHSS
Elias Barbosa Costa
- Co-author in INFLUENCE OF Al CONTENT IN THE ZN BATH ON GALVANIZED COATING FORMATION OF HIGH STRENGTH STEELS
Lei Cui
- Author in INVESTIGATION OF ORANGE PEEL DEFECT ON GALVANIZED DP STEEL SHEET
Walter DAL'MAZ SILVA
- Author in AN INTEGRATED METHODOLOGY FOR THE ROOT CAUSE ANALYSIS OF MECHANICAL AND METALLURGICAL DEFECTS OF HOT-DIP GALVANIZED COATINGS
Kyle Daun
- Co-author in EFFECT OF ANNEALING ATMOSPHERE AND STEEL ALLOY COMPONENTS ON SURFACE TOPOGRAPHY AND RADIATIVE PROPERTIES OF ADVANCED HIGH STRENGTH STEEL STRIP DURING CONTINUOUS GALVANIZING
Malcolm Davidson
- Co-author in RAPID DESIGN OF NEW Zn-Mg-Al-Sn COATINGS WITH LOW MELTING POINT FOR AUTOMOTIVE SHEET APPLICATIONS VIA MACHINE LEARNING
Louis Deaulmerie
- Co-author in SCHEDULING SOLUTIONS SUPPORT SUSTAINABLE PRODUCT QUALITY OF GALVANIZED COILS BY PROVIDING PRODUCTION SCHEDULES IN REPEATABLE QUALITY
Marc Debeaux
- Author in INFLUENCE OF ELECTROLYTE COMPOSITION AND TEMPERATURE ON ENERGY DEMAND AND ZINC STRUCTURE DURING ELECTRO-GALVANIZING
- Co-author in ON THE REDUCTION OF TEMPERATURE GRADIENTS WITHIN AlSi-COATED BLANKS WITH NON-CONSTANT SHEET THICKNESS FOR HOT PRESS FORMING APPLICATION
Emmanuel DECHASSEY
- Co-author in HDG POT PRODUCTIVITY
Chris Delicaat
- Co-author in SIMULATION OF FLASH PRE-OXIDATION IN AN ANNEALING SIMULATOR
Mathieu Delsipee
- Co-author in EXPERIMENTAL AND NUMERICAL STUDY OF GAS JET COOLING AT HIGH REYNOLDS NUMBER
Joost De Strycker
- Co-author in MICROSTRUCTURE AND TEXTURE ANALYSIS OF A NEAR-EUTECTIC Zn-Al COATING DEPOSITED ON STEEL BY HOT-DIP GALVANIZING
- Co-author in QUANTITATIVE EVALUATION OF NANOSCALE MECHANICAL PROPERTIES OF Zn-Al AND Zn-Al-Mg COATINGS ON STEEL SHEET BY NANOINDENTATION
- Co-author in ZnAlMg METALLIC COATINGS IN HARSH ENVIRONMENTS: A COMPARATIVE AND CHALLENGING STUDY
Eva Diaz Gonzalez
- Co-author in ZnAlMg METALLIC COATINGS IN HARSH ENVIRONMENTS: A COMPARATIVE AND CHALLENGING STUDY
Matthieu DIDIER
- Author in HDG POT PRODUCTIVITY
Amedeo Di-Giovanni
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
erwan Diler
- Co-author in RECENT ADVANCE IN CORROSION MONITORING OF ATMOSPHERIC CORROSION OF GALVANISED STEEL AND ZINC ALLOYED COATED STEEL
Andrew Dixon
- Co-author in SPANGLE NUCLEATION AND REFINEMENT THEORY IN 55%Al-Zn COATED STEEL
Atsushi Doi
- Co-author in STRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF TOP DROSS IN A MOLTEN ZINC BATH
Laurent Dorel
- Co-author in SIAS® 4.0 - THE NEXT GENERATION OF AUTOMATIC SURFACE INSPECTION SYSTEM USING CONVOLUTIONAL NEURON NETWORK FOR DETECTION AND CLASSIFICATION OF SURFACE DEFECTS
michel DUBOIS
- Author in A SIMPLE MODEL TO ESTIMATE AND TRACK THE WEAR RATE OF POT BEARINGS
MICHEL DUBOIS
- Author in POT ROLL GEOMETRY AND CROSSBOW CORRECTION
- Author in PRODUCTION OF HEAVY COATING AT LOW SPEED
- Co-author in EXPERIMENTAL AND NUMERICAL STUDY OF GAS JET COOLING AT HIGH REYNOLDS NUMBER
Hubert Duchaczek
- Co-author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
Jiri Duchoslav
- Co-author in NANOSCALE INVESTIGATION OF GRAIN BOUNDARY WETTING AND MICRO CRACKS OF PRESS HARDENED GALVANIZED 20MnB8 STEEL
Claudie Dulcy
- Co-author in AN INTEGRATED METHODOLOGY FOR THE ROOT CAUSE ANALYSIS OF MECHANICAL AND METALLURGICAL DEFECTS OF HOT-DIP GALVANIZED COATINGS
Hervé Duval
- Co-author in IMPROVEMENT OF WETTABILITY BETWEEN STEEL AND LIQUID Zn-Al ALLOY BY FORCED WETTING
Werner Ecker
- Co-author in NUMERICAL MODEL FOR PREDICTING LIQUID METAL CRACKING DURING RESISTANCE SPOT WELDING OF ADVANCED HIGH STRENGTH STEELS
- Co-author in SCANNING ELECTRON MICROSCOPE INVESTIGATION ON ZINC INDUCED CRACKS OF COATED PRESS HARDENED COMPONENTS
Niclas Eick TU Clausthal
- Author in STRESS CORROSION CRACKING OF HOT FORMING STEELS
Henrique Eleuterio
- Author in INFLUENCE OF Al CONTENT IN THE ZN BATH ON GALVANIZED COATING FORMATION OF HIGH STRENGTH STEELS
Du-Rim Eo
- Author in ENHANCEMENT OF HOT DIP GALVANIZING ON AS-CAST HIGH-Mn STEEL BY FABRICATION OF FUNCTIONALLY GRADED MULTILAYERS THROUGH LASER CLADDING OF LOW CARBON STEEL
Werner Essl
- Co-author in INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
Werner Eßl
- Author in CFD-DPM MODELLING AND ANALYSIS OF DROSS PARTICLE DYNAMICS IN HOT-DIP GALVANIZING BATHS
- Co-author in NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS
Dan Evans
- Co-author in SNOUT TEMPERATURE PREDICTIVE MODEL AND Zn POT THERMAL BALANCE
Josef Faderl
- Author in AVOIDING ZINC INDUCED CRACKING IN HOT FORMING
- Co-author in IMPACT OF SURFACE TOPOGRAPHY OF ELECTRO GALVANIZED STEEL SHEET ON PAINT APPEARANCE
- Co-author in INFLUENCE OF OXIDE COMPOSITION AND SHOT BLASTING PARAMETERS ON SURFACE RESISTANCE OF GALVANIZED PRESS HARDENED STEELS
- Co-author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
- Co-author in NANOSCALE STRUCTURE AND COMPOSITIONAL ANALYSIS OF SURFACE OXIDES ON HOT-DIP GALVANIZED PRESS-HARDENED STEEL
Leon Fadljevic
- Co-author in PREDICTION OF ANODE LIFE TIME IN ELECTRO GALVANIZING LINES BY BIG DATA ANALYSIS
Rhys Faulkner
- Author in OFFLINE SIMULATION OF GALVANISING BATH JOURNAL BEARINGS AS A COST EFFECTIVE SOLUTION TO IMPROVE LINE PERFORMANCE AND MITIGATE RISK
Bart Feer-Kilani, van der
- Co-author in SIMULATION OF FLASH PRE-OXIDATION IN AN ANNEALING SIMULATOR
Martin Fein
- Author in NEWEST GENERATION OF METRIS ADVANCED FURNACE CONTROL FULFILS HIGHEST QUALITY DEMANDS
Alessandro Ferraiuolo
- Author in NEW APPROACH FOR ONLINE AUSTENITE FRACTION MEASUREMENT FORMED DURING CONTINUOUS ANNEALING PROCESS. PART I: MEASURE ON HIGH STRENGTH MICROALLOYED STEEL GRADES
Guillaume FERRIER
- Co-author in HDG POT PRODUCTIVITY
Kip Findley
- Co-author in QUANTITATIVE ASSESSMENT OF THE INFLUENCE OF STARTING MICROSTRUCTURE ON THE LIQUID METAL EMBRITTLEMENT SUSCEPTIBILITY OF 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
Donal Finnerty
- Author in A NOVEL MULTI-SLOT AIR-KNIFE DESIGN FOR LIGHTER MORE CONSISTENT COATING WEIGHTS IN THE GAS JET WIPING PROCESS
Danique Fintelman
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Yvon Fontaine
- Author in SIAS® 4.0 - THE NEXT GENERATION OF AUTOMATIC SURFACE INSPECTION SYSTEM USING CONVOLUTIONAL NEURON NETWORK FOR DETECTION AND CLASSIFICATION OF SURFACE DEFECTS
Samuel Forest
- Co-author in MICROSTRUCTURE AND TEXTURE ANALYSIS OF A NEAR-EUTECTIC Zn-Al COATING DEPOSITED ON STEEL BY HOT-DIP GALVANIZING
van den Berg Frenk
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Gabriel Fricout
- Co-author in SIAS® 4.0 - THE NEXT GENERATION OF AUTOMATIC SURFACE INSPECTION SYSTEM USING CONVOLUTIONAL NEURON NETWORK FOR DETECTION AND CLASSIFICATION OF SURFACE DEFECTS
Masahiro Fuda
- Co-author in THE EFFECT OF PHOSPHORIC ACID ADDED TO CHEMICAL CONVERSION COATING LAYER ON CORROSION PROTECTION IN SCRIBED AREAS OF ZINC-COATED STEELS
Nobuhiro Fujita Nippon Steel
- Author in RECENT DEVELOPMENTS AND OUTLOOK ON ZINC AND ZINC ALLOY COATED STEEL SHEETS IN JAPAN
Jean Pierre FURMANN
- Author in CELES ECOTRANSFLUX™, A DISRUPTIVE TECHNOLOGY FOR HEATING GEN3 AHSS
Hiroyasu FURUKAWA
- Co-author in DEVELOPMENT OF ADVANCED PRE-PAINTED Zn-11%Al-3Mg-0.2%Si COATED STEEL SHEETS
Wolfgang Gaderbauer
- Author in NANOSCALE STRUCTURE AND COMPOSITIONAL ANALYSIS OF SURFACE OXIDES ON HOT-DIP GALVANIZED PRESS-HARDENED STEEL
Neil Gao
- Author in CORROSION EVALUATION OF THIN Zn-Al ALLOY COATINGS IN A SEVERE MARINE ENVIRONMENT
- Author in DEVELOPMENT OF A Zn-Al-Mn-Sb ALLOY COATING FOR PRESS HARDENABLE STEELS
Domenico Garassino Danieli Automation - Digi&Met
- Author in EFFICIENT AND EFFECTIVE OPERATION OF A HOT DIP GALVANIZING LINE
Mélanie Gauvin
- Co-author in QUANTITATIVE EVALUATION OF NANOSCALE MECHANICAL PROPERTIES OF Zn-Al AND Zn-Al-Mg COATINGS ON STEEL SHEET BY NANOINDENTATION
Bruno GAY
- Co-author in MECHANISMS STABILIZING GENERAL VAPOUR-PHASE GALVANIZING
Cédric GEORGES
- Co-author in INFLUENCE OF Zn-BASED COATING ALLOYS ON HYDROGEN DIFFUSION AND CORROSION RESISTANCE IN A DP STEEL
Johann Gerdenitsch
- Author in IMPACT OF SURFACE TOPOGRAPHY OF ELECTRO GALVANIZED STEEL SHEET ON PAINT APPEARANCE
- Co-author in PREDICTION OF ANODE LIFE TIME IN ELECTRO GALVANIZING LINES BY BIG DATA ANALYSIS
PASCAL GERKENS
- Co-author in COMPARATIVE ASSESSMENT OF GI AND GA COATED AHSS LME SENSITIVITY DURING SPOT WELDING
Hassan Ghassemi
- Co-author in EVALUATION OF INITIATION AND PROPAGATION OF LME CRACKS ON THE GALVANIZED 3G-AHSS USING INTERRUPTED RESISTANCE SPOT-WELDING METHOD
Marie-Laurence Giorgi
- Author in IMPROVEMENT OF WETTABILITY BETWEEN STEEL AND LIQUID Zn-Al ALLOY BY FORCED WETTING
- Co-author in SELECTIVE OXIDATION OF Fe-Mn (1WT.%) BINARY ALLOY DURING CONTINUOUS ANNEALING
Olga Girina
- Co-author in EFFECT OF STEEL SUB-SURFACE STRUCTURE ON MECHANICAL PROPERTIES OF GALVANIZED 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
JORIS GIROUX
- Co-author in COMPARATIVE ASSESSMENT OF GI AND GA COATED AHSS LME SENSITIVITY DURING SPOT WELDING
Li Gong
- Co-author in SELECTIVE OXIDATION OF Fe-Mn (1WT.%) BINARY ALLOY DURING CONTINUOUS ANNEALING
Frank Goodwin
- Author in NORTH AMERICAN DEVELOPMENTS AND OPPORTUNITIES FOR GALVANIZED STEEL SHEET
- Co-author in A MODELING FRAMEWORK FOR TOP SKIMMING FORMATION IN GALVANIZING BATH
- Co-author in A NOVEL MULTI-SLOT AIR-KNIFE DESIGN FOR LIGHTER MORE CONSISTENT COATING WEIGHTS IN THE GAS JET WIPING PROCESS
- Co-author in DEVELOPMENT OF NEW GRADES OF Zn-COATED PRESS-HARDENABLE STEEL COMPATIBLE WITH THE CONTINUOUS GALVANIZING LINE
- Co-author in EFFECT OF CGL-COMPATIBLE HEAT TREATMENTS ON THE SELECTIVE OXIDATION OF A 0.15C-6Mn-2Al-1Si THIRD-GENERATION ADVANCED HIGH STRENGTH STEEL
- Co-author in EFFECT OF PROCESS ATMOSPHERE DEW POINT AND MINOR Sn ADDITION ON THE SELECTIVE OXIDATION DURING INTERCRITICAL ANNEALING OF A MEDIUM-Mn THIRD GENERATION ADVANCED HIGH STRENGTH STEEL
- Co-author in GALVANIZING OF TRIP-Si STEELS
- Co-author in INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
- Co-author in INFLUENCE OF MINOR ADDITION OF Si AND Ti ON THE CORROSION PERFORMANCE OF ZM COATED STEEL
- Co-author in INFLUENCE OF Zn-BASED COATING ALLOYS ON HYDROGEN DIFFUSION AND CORROSION RESISTANCE IN A DP STEEL
- Co-author in NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS
Srinivasulu Grandhi
- Author in STUDY OF MANGANESE ADDITION ON THE CORROSION RESISTANCE OF GALVANIZED ZINC COATING
Benjamin Grenier
- Co-author in SCHEDULING SOLUTIONS SUPPORT SUSTAINABLE PRODUCT QUALITY OF GALVANIZED COILS BY PROVIDING PRODUCTION SCHEDULES IN REPEATABLE QUALITY
- Co-author in THROUGH-PROCESS OPTIMIZATION (TPO) - A MODERN APPROACH TO RAPID PRODUCT DEVELOPMENT
Heiko Groiss
- Co-author in NANOSCALE INVESTIGATION OF GRAIN BOUNDARY WETTING AND MICRO CRACKS OF PRESS HARDENED GALVANIZED 20MnB8 STEEL
- Co-author in NANOSCALE STRUCTURE AND COMPOSITIONAL ANALYSIS OF SURFACE OXIDES ON HOT-DIP GALVANIZED PRESS-HARDENED STEEL
Martin Gruber
- Co-author in NUMERICAL MODEL FOR PREDICTING LIQUID METAL CRACKING DURING RESISTANCE SPOT WELDING OF ADVANCED HIGH STRENGTH STEELS
Hugues Guerault
- Author in FAST AND NON-DESTRUCTIVE METHOD FOR PHASE QUANTIFICATION IN ZINC ALLOYED COATED STEEL SHEET
Paul Haghi-Ashtiani
- Co-author in SELECTIVE OXIDATION OF Fe-Mn (1WT.%) BINARY ALLOY DURING CONTINUOUS ANNEALING
Douglas Alexander Hamilton
- Co-author in FEEDING TECHNOLOGY FOR A CONTINUOUS PVD COATING LINE
Heung Nam Han
- Co-author in ENHANCEMENT OF HOT DIP GALVANIZING ON AS-CAST HIGH-Mn STEEL BY FABRICATION OF FUNCTIONALLY GRADED MULTILAYERS THROUGH LASER CLADDING OF LOW CARBON STEEL
- Co-author in THE EFFECT OF Si ADDITION ON Zn-ASSISTED LIQUID METAL EMBRITTLEMENT IN 22MnB5 PRESS HARDENING STEEL
Young Chul Han
- Co-author in EFFECT OF ANNEALING ATMOSPHERE ON HYDROGEN EMBRITTLEMENT OF ADVANCE HIGH STRENTH STEEL
Tae-Kyo Han
- Co-author in ENHANCEMENT OF HOT DIP GALVANIZING ON AS-CAST HIGH-Mn STEEL BY FABRICATION OF FUNCTIONALLY GRADED MULTILAYERS THROUGH LASER CLADDING OF LOW CARBON STEEL
David Harrison
- Co-author in CORROSION EVALUATION OF THIN Zn-Al ALLOY COATINGS IN A SEVERE MARINE ENVIRONMENT
Johannes Haslmayr
- Co-author in AVOIDING ZINC INDUCED CRACKING IN HOT FORMING
Kentaro Hata
- Author in RELATIONSHIP BETWEEN HYDROGEN ABSORPTION AND CORROSION BEHAVIOR OF ELECTROGALVANIZED STEEL SHEETS IN DRY-WET CORROSION ENVIRONMENT
Peter William Hazelett
- Co-author in FEEDING TECHNOLOGY FOR A CONTINUOUS PVD COATING LINE
Gerald Helekal
- Co-author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Falk-Florian Henrich Smart Steel Technologies
- Author in INSPECTING SURFACE QUALITY OF GALVANIZED STEEL BY DEEP LEARNING
Aldo Henrique de Almeida Barbosa
- Author in EFFECT OF THE ATMOSPHERE DEW POINT OF CONTINUOUS ANNEALING FURNACES ON THE QUALITY OF GA COATING ON BAKE HARDENING STEEL
- Co-author in INFLUENCE OF Al CONTENT IN THE ZN BATH ON GALVANIZED COATING FORMATION OF HIGH STRENGTH STEELS
olivier herbiet
- Author in IN-LINE CHARACTERISATION OF THE AUSTENITE LEVEL TO ENSURE THE MECHANICAL PROPERTIES ALONG THE COIL
Sabine Hild
- Co-author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
Benjamin Hilpert
- Co-author in NUMERICAL MODEL FOR PREDICTING LIQUID METAL CRACKING DURING RESISTANCE SPOT WELDING OF ADVANCED HIGH STRENGTH STEELS
Kurt Hingerl
- Co-author in NANOSCALE INVESTIGATION OF GRAIN BOUNDARY WETTING AND MICRO CRACKS OF PRESS HARDENED GALVANIZED 20MnB8 STEEL
Jason Hodges
- Co-author in Zn VAPOUR INDUCED CORROSION OF 253 MA STAINLESS STEEL END PLATE AND FLANGE IN RETRACTABLE SNOUTS
Seok-Hyun Hong
- Author in THE EFFECT OF Si ADDITION ON Zn-ASSISTED LIQUID METAL EMBRITTLEMENT IN 22MnB5 PRESS HARDENING STEEL
Moon Hi Hong
- Co-author in NEW INDUSTRIAL ACRYLIC RESIN COIL-COATING BOTH ON MECHANICALLY PATTERNED GI AND STS SHEETS
Sven Erik Hörnström
- Author in CHARACTERIZATION OF RESIDUAL STRESSES AT SHEARED, MILLED AND LASER CUT EDGES IN MARTENSITIC STEELS
Katsuya Hoshino
- Author in SEGREGATION MECHANISM OF Al-BASED OXIDES ON Zn-0.2MASS%Al HOT-DIP GALVANIZED STEEL SHEETS
- Co-author in ANALYSIS OF COSMETIC CORROSION BEHAVIOR BY IN-SITU OBSERVATION IN WET AND DRY CONDITIONS
David Hoydick
- Author in U. S. STEEL XG3 – 3rd GENERATION STEEL: CUSTOMER-FRIENDLY CHEMISTRY, PROPERTIES, AND MANUFACTURABILITY ENABLED BY UNIQUE PROCESSING
Andrew Hrymak
- Co-author in A NOVEL MULTI-SLOT AIR-KNIFE DESIGN FOR LIGHTER MORE CONSISTENT COATING WEIGHTS IN THE GAS JET WIPING PROCESS
Joo-Youl Huh
- Author in DENDRITIC MORPHOLOGIES OF HOT-DIP GALVANIZED Zn-0.2 WT.% Al COATINGS: EXISTENCE OF THIRD PREFERRED GROWTH DIRECTIONS
Hyeon Seok Hwang
- Co-author in DENDRITIC MORPHOLOGIES OF HOT-DIP GALVANIZED Zn-0.2 WT.% Al COATINGS: EXISTENCE OF THIRD PREFERRED GROWTH DIRECTIONS
Florin Ilinca
- Co-author in A MODELING FRAMEWORK FOR TOP SKIMMING FORMATION IN GALVANIZING BATH
Toru Imokawa
- Co-author in EFFECT OF THIOGLYCOLIC ACID ON THE MORPHOLOGY OF Zn ELECTRODEPOSITED ON STEEL SHEETS
Haruyuki Inui
- Co-author in THE MECHANICAL PROPERTIES AND CRYSTAL STRUCTURE OF Fe-Zn SOLID-SOLUTION IN HOT-STAMPED GA COATING
Cornelia Ionescu
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Yu Ito
- Co-author in EFFECT OF INITIAL VELOCITY DISTRIBUTIONS IN THE TRANSITION REGION IMPINGEMENT OF SLOT-JET
Eric JACQUESON
- Co-author in JET VAPOUR DEPOSITION: A TECHNICAL ECONOMIC ALTERNATIVE TO ELECTRO-GALVANIZING FOR Zn COATINGS OF FUTURE STEELS
Benoit Jalard
- Co-author in SCHEDULING SOLUTIONS SUPPORT SUSTAINABLE PRODUCT QUALITY OF GALVANIZED COILS BY PROVIDING PRODUCTION SCHEDULES IN REPEATABLE QUALITY
- Co-author in THROUGH-PROCESS OPTIMIZATION (TPO) - A MODERN APPROACH TO RAPID PRODUCT DEVELOPMENT
- Co-author in THROUGH-PROCESS QUALITY CONTROL (TPQC) SYSTEM - ANY DATA, ANY TIME
Min-ho Jang
- Co-author in EFFECT OF ANNEALING ATMOSPHERE ON HYDROGEN EMBRITTLEMENT OF ADVANCE HIGH STRENTH STEEL
Otmar Jannasch Smart Steel Technologies
- Author in INSPECTING SURFACE QUALITY OF GALVANIZED STEEL BY DEEP LEARNING
Klaus Jax
- Co-author in SCHEDULING SOLUTIONS SUPPORT SUSTAINABLE PRODUCT QUALITY OF GALVANIZED COILS BY PROVIDING PRODUCTION SCHEDULES IN REPEATABLE QUALITY
- Co-author in THROUGH-PROCESS OPTIMIZATION (TPO) - A MODERN APPROACH TO RAPID PRODUCT DEVELOPMENT
- Co-author in THROUGH-PROCESS QUALITY CONTROL (TPQC) SYSTEM - ANY DATA, ANY TIME
Richard Johansson VOLVO CAR CORPORATION
- Author in Current use and future outlook of coated sheet steel at Volvo Cars
Andrew Johnstone
- Co-author in WIPING PRESSURE DYNAMICS AND THEIR EFFECTS ON GALVANIZING COATING SMOOTHNESS
SeungPill Jung
- Co-author in EFFECT OF ANNEALING ATMOSPHERE ON HYDROGEN EMBRITTLEMENT OF ADVANCE HIGH STRENTH STEEL
Christine Kaczynski Arcelormittal
- Co-author in COMPARATIVE ASSESSMENT OF GI AND GA COATED AHSS LME SENSITIVITY DURING SPOT WELDING
Karim Kahoul
- Author in ArcelorMittal GENT PRODUCES 3rd GEN. AHSS INCL. Q&P ON THE UNIQUE ANNEALING FURNACE FROM ANDRITZ
Nora Kaiser
- Co-author in THE ROLE OF STEEL SHEET AND ITS IMPACT ON AN OUTSTANDING QUALITY PAINT USED FOR AUTOMOTIVE OUTER SKIN
Timothy Dean Kaiser
- Co-author in FEEDING TECHNOLOGY FOR A CONTINUOUS PVD COATING LINE
Tomomi Kanazawa
- Co-author in ATMOSPHERIC CORROSION BEHAVIOURS OF AUTOMOTIVE STEEL SHEETS EXPOSED IN EAST AND SOUTH-EAST ASIA REGIONS
Taihei Kaneto
- Author in DEVELOPMENT OF ADVANCED PRE-PAINTED Zn-11%Al-3Mg-0.2%Si COATED STEEL SHEETS
Jee-Hyun Kang
- Co-author in EFFECT OF Zn-COATING PROCESS ON LIQUID METAL EMBRITTLEMENT OF TRIP STEEL
Narayana Kaushik Karthik
- Author in INCREASING LIFETIME OF METALLIC RADIANT TUBES IN VERTICAL GALVANIZING LINES
Sho Katsura
- Author in INVESTIGATION OF "BUILD-UP" GROWTH BEHAVIOUR ON HEARTH ROLLS OF CONTINUOUS GALVANIZING LINE
- Co-author in IN-SITU OBSERVATION OF THE CRYSTALLIZATION AND GROWTH BEHAVIOR OF Fe-Zn INTERMETALLIC COMPOUND ("BOTTOM DROSS") IN THE MOLTEN ZINC USING X-RAY TRANSMISSION IMAGING METHOD
Yasuaki KAWAMURA
- Co-author in DEVELOPMENT OF ADVANCED PRE-PAINTED Zn-11%Al-3Mg-0.2%Si COATED STEEL SHEETS
Ovanes Kazanjian
- Co-author in OPTIMAL CONTENT OF ALUMINUM IN ALUMINUM-ZINC ALLOY IN HOT-DIP COATING ON THE STEEL STRIP
Roman Kern
- Co-author in PREDICTION OF ANODE LIFE TIME IN ELECTRO GALVANIZING LINES BY BIG DATA ANALYSIS
Abdellah Kharicha
- Co-author in INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
Abdellah Kharicha
- Author in NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS
- Co-author in CFD-DPM MODELLING AND ANALYSIS OF DROSS PARTICLE DYNAMICS IN HOT-DIP GALVANIZING BATHS
Sung-Joon Kim
- Co-author in EFFECT OF Zn-COATING PROCESS ON LIQUID METAL EMBRITTLEMENT OF TRIP STEEL
- Co-author in THE EFFECT OF Si ADDITION ON Zn-ASSISTED LIQUID METAL EMBRITTLEMENT IN 22MnB5 PRESS HARDENING STEEL
Tae Chul Kim
- Author in INVESTIGATION OF HOT-DIP ZnMgAl COATINGS FOR AUTOMOTIVE APPLICATIONS
Jong Sang Kim
- Co-author in INVESTIGATION OF HOT-DIP ZnMgAl COATINGS FOR AUTOMOTIVE APPLICATIONS
HEUNG YUN KIM
- Author in NEW ZnAlMg ALLOY COATINGS WITH ULTRA HIGH CORROSION RESISTANCE
SUNGJOO KIM
- Co-author in NEW ZnAlMg ALLOY COATINGS WITH ULTRA HIGH CORROSION RESISTANCE
Myung Soo Kim
- Co-author in DEVELOPMENT OF NEW Al COATED STEEL WITHOUT LME CRACKS AND EXCELLENT CORROSION
- Co-author in NEW ZnAlMg ALLOY COATINGS WITH ULTRA HIGH CORROSION RESISTANCE
Doyub Kim
- Author in EFFECT OF Zn-COATING PROCESS ON LIQUID METAL EMBRITTLEMENT OF TRIP STEEL
Seong Gyoon Kim
- Co-author in DENDRITIC MORPHOLOGIES OF HOT-DIP GALVANIZED Zn-0.2 WT.% Al COATINGS: EXISTENCE OF THIRD PREFERRED GROWTH DIRECTIONS
Yong-Hee Kim
- Co-author in EFFECT OF ANNEALING ATMOSPHERE ON HYDROGEN EMBRITTLEMENT OF ADVANCE HIGH STRENTH STEEL
Hye-Jin Kim
- Co-author in EFFECT OF ANNEALING ATMOSPHERE ON HYDROGEN EMBRITTLEMENT OF ADVANCE HIGH STRENTH STEEL
Kazuya Kimijima
- Co-author in INVESTIGATION OF "BUILD-UP" GROWTH BEHAVIOUR ON HEARTH ROLLS OF CONTINUOUS GALVANIZING LINE
Kyosuke Kishida
- Co-author in THE MECHANICAL PROPERTIES AND CRYSTAL STRUCTURE OF Fe-Zn SOLID-SOLUTION IN HOT-STAMPED GA COATING
Nico Klingner
- Co-author in NANOSCALE STRUCTURE AND COMPOSITIONAL ANALYSIS OF SURFACE OXIDES ON HOT-DIP GALVANIZED PRESS-HARDENED STEEL
Tobias Klinkberg
- Author in SIMULATION AND OPTIMISATION OF A WIPING KNIFE ON THE LAB SCALE
Makoto Kobashi
- Co-author in FORMATION SEQUENCE OF Fe-Al INTERMETALLIC PHASES IN HOT-DIP Zn-Al-Mg ALLOY GALVANIZED STEELS
Thomas Koll
- Author in EUROPE: TOMORROW JUST AROUND THE CORNER?
- Co-author in INFLUENCE OF ELECTROLYTE COMPOSITION AND TEMPERATURE ON ENERGY DEMAND AND ZINC STRUCTURE DURING ELECTRO-GALVANIZING
- Co-author in ON GRAIN BOUNDARY TOPOGRAPHY AND SURFACE REACTIVITY DURING HOT-DIP GALVANISING
- Co-author in SIMULATION AND OPTIMISATION OF A WIPING KNIFE ON THE LAB SCALE
Siegfried Kolnberger
- Co-author in AVOIDING ZINC INDUCED CRACKING IN HOT FORMING
- Co-author in NANOSCALE INVESTIGATION OF GRAIN BOUNDARY WETTING AND MICRO CRACKS OF PRESS HARDENED GALVANIZED 20MnB8 STEEL
Alexey Koltsov
- Co-author in IMPROVEMENT OF WETTABILITY BETWEEN STEEL AND LIQUID Zn-Al ALLOY BY FORCED WETTING
Takeshi Konishi
- Author in STRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF TOP DROSS IN A MOLTEN ZINC BATH
Bart J. Kooi
- Co-author in MECHANICAL PROPERTIES AND CRACKING BEHAVIOR OF HOT-DIP GALVANIZED ZnAlMg COATINGS
Masumi Koori
- Author in THE EFFECT OF BONDING STATE BETWEEN THE GALVANIZED STEEL SHEETS AND THE ADHESIVE ON DETERIORATION BEHAVIOR OF ADHESIVE JOINT
Nils Köpper
- Author in ON GRAIN BOUNDARY TOPOGRAPHY AND SURFACE REACTIVITY DURING HOT-DIP GALVANISING
Buyung Kosasih
- Co-author in WIPING PRESSURE DYNAMICS AND THEIR EFFECTS ON GALVANIZING COATING SMOOTHNESS
Alain Köster
- Co-author in MICROSTRUCTURE AND TEXTURE ANALYSIS OF A NEAR-EUTECTIC Zn-Al COATING DEPOSITED ON STEEL BY HOT-DIP GALVANIZING
Horst Krauthäuser
- Author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Venu Krishnardula
- Author in AHSS SURFACE OXIDE PHASE FORMATION DURING ANNEALING AND PREDICTING THEIR TYPE USING GIBBS ENERGY MINIMIZATION (GEM) THERMODYNAMIC PRINCIPLE
Andreas Kugi
- Co-author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Marianne Kuperus
- Co-author in THE MODIFICATION PROCESS OF THE DROSS BUILD-UP STRUCTURE ON SUBMERGED HARDWARE IN Zn-Al AND Zn-Al-Mg BATHS
Thomas Kurz
- Co-author in AVOIDING ZINC INDUCED CRACKING IN HOT FORMING
Young Jin Kwak
- Co-author in ANTI-CORROSION PERFORMANCE OF ZnMg AND ZnMgAl-COATED STEELS FOR AUTOMOTIVE APPLICATIONS
Vaclav Kytka
- Co-author in ELECTROCHEMICAL BEHAVIOR OF Si PHASES IN NOVEL ZnAlMgSi COATINGS
JoungHyun La
- Author in EFFECT OF ANNEALING ATMOSPHERE ON HYDROGEN EMBRITTLEMENT OF ADVANCE HIGH STRENTH STEEL
Carsten Lachmann Volkswagen Aktiengesellschaft
- Author in STRESS CORROSION CRACKING OF HOT FORMING STEELS
Koen Lammers
- Co-author in SELECTIVE OXIDATION IN A BAKE HARDENING STEEL FOR DFF - RTF ANNEALING CYCLES
Maïwenn LARNICOL
- Co-author in INFLUENCE OF Zn-BASED COATING ALLOYS ON HYDROGEN DIFFUSION AND CORROSION RESISTANCE IN A DP STEEL
Nathalie LeBozec
- Author in THE EFFECT OF MICROSTRUCTURE ON THE CORROSION STABILITY OF ZINC ALUMINIUM MAGNESIUM ALLOYED COATED STEEL IN ATMOSPHERIC CONDITIONS
- Co-author in INFLUENCE OF MINOR ADDITION OF Si AND Ti ON THE CORROSION PERFORMANCE OF ZM COATED STEEL
Suk Kyu Lee
- Author in DEVELOPMENT OF NEW Al COATED STEEL WITHOUT LME CRACKS AND EXCELLENT CORROSION
- Co-author in DENDRITIC MORPHOLOGIES OF HOT-DIP GALVANIZED Zn-0.2 WT.% Al COATINGS: EXISTENCE OF THIRD PREFERRED GROWTH DIRECTIONS
JONG BEOM LEE
- Author in AN OPTIMIZATION OF SPANGLE MINIMIZER FOR Al-Si COATED STEEL SPANGLE CONTROL
Jae-Won Lee
- Co-author in EFFECT OF Al CONTENT ON THE CORROSION BEHAVIOR IN Mg-Zn-Al ALLOY COATED STEEL SHEET
- Co-author in Study on Corrosion Resistance and Adhesion of Paint Coated Zn-Al-Mg Galvanized Steel
Su bin Lee
- Co-author in NEW INDUSTRIAL ACRYLIC RESIN COIL-COATING BOTH ON MECHANICALLY PATTERNED GI AND STS SHEETS
Anne Le Gac
- Co-author in INFLUENCE OF MINOR ADDITION OF Si AND Ti ON THE CORROSION PERFORMANCE OF ZM COATED STEEL
Alexandre LHOEST
- Author in MULTILAYER ANGULAR ROLL MODEL FOR ONLINE CONTINUOUS CONTROL OF GALVANIZING LINES DRIVEN BY FURNACE MATHEMATICAL MODEL
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Kaihsiang Lin
- Author in EFFECT OF ANNEALING ATMOSPHERE AND STEEL ALLOY COMPONENTS ON SURFACE TOPOGRAPHY AND RADIATIVE PROPERTIES OF ADVANCED HIGH STRENGTH STEEL STRIP DURING CONTINUOUS GALVANIZING
Fredrik Lindberg
- Co-author in CHARACTERIZATION OF RESIDUAL STRESSES AT SHEARED, MILLED AND LASER CUT EDGES IN MARTENSITIC STEELS
Daniel Liu
- Co-author in AHSS SURFACE OXIDE PHASE FORMATION DURING ANNEALING AND PREDICTING THEIR TYPE USING GIBBS ENERGY MINIMIZATION (GEM) THERMODYNAMIC PRINCIPLE
- Co-author in CORROSION EVALUATION OF THIN Zn-Al ALLOY COATINGS IN A SEVERE MARINE ENVIRONMENT
- Co-author in DEVELOPMENT OF A Zn-Al-Mn-Sb ALLOY COATING FOR PRESS HARDENABLE STEELS
Mario Lovric
- Author in PREDICTION OF ANODE LIFE TIME IN ELECTRO GALVANIZING LINES BY BIG DATA ANALYSIS
Gerald Luckeneder
- Co-author in IN SITU INVESTIGATION OF HYDROGEN ENTRY AND HYDROGEN EMBRITTLEMENT OF ZINC-COATED HIGH STRENGTH STEELS INDUCED BY ATMOSPHERIC CORROSION
- Co-author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
Hans-Bodo Lüngen
- Author in WAYS TO REDUCE CO2 EMISSIONS IN IRON AND STEELMAKING IN EUROPE
Friedrich Luther
- Author in ON THE REDUCTION OF TEMPERATURE GRADIENTS WITHIN AlSi-COATED BLANKS WITH NON-CONSTANT SHEET THICKNESS FOR HOT PRESS FORMING APPLICATION
- Co-author in ON GRAIN BOUNDARY TOPOGRAPHY AND SURFACE REACTIVITY DURING HOT-DIP GALVANISING
Tiago Machado
- Author in NEW COATING FOR PRESS HARDENED STEELS: AlSiZnMg
Friedhelm Macherey
- Author in THE ROLE OF STEEL SHEET AND ITS IMPACT ON AN OUTSTANDING QUALITY PAINT USED FOR AUTOMOTIVE OUTER SKIN
Khatereh Maleki
- Author in ON THE ORIGIN OF MICRO-CRACKING IN ZINC COATED PRESS HARDENED STEELS
Roel Mallens
- Author in SELECTIVE OXIDATION IN A BAKE HARDENING STEEL FOR DFF - RTF ANNEALING CYCLES
Mélodie MANDY
- Author in INFLUENCE OF Zn-BASED COATING ALLOYS ON HYDROGEN DIFFUSION AND CORROSION RESISTANCE IN A DP STEEL
Ivan Marincic Hatch Ltd
- Author in THE EVOLUTION OF COATING CONTROL SYSTEMS AS THE NEED FOR NEW COATED PRODUCTS EXPANDS
Daniel MARTINS
- Co-author in MULTILAYER ANGULAR ROLL MODEL FOR ONLINE CONTINUOUS CONTROL OF GALVANIZING LINES DRIVEN BY FURNACE MATHEMATICAL MODEL
Jean-Michel Mataigne
- Co-author in COMPARATIVE ASSESSMENT OF GI AND GA COATED AHSS LME SENSITIVITY DURING SPOT WELDING
- Co-author in MICROSTRUCTURE AND TEXTURE ANALYSIS OF A NEAR-EUTECTIC Zn-Al COATING DEPOSITED ON STEEL BY HOT-DIP GALVANIZING
- Co-author in QUANTITATIVE EVALUATION OF NANOSCALE MECHANICAL PROPERTIES OF Zn-Al AND Zn-Al-Mg COATINGS ON STEEL SHEET BY NANOINDENTATION
Takeshi Matsuda
- Co-author in EFFECT OF THIOGLYCOLIC ACID ON THE MORPHOLOGY OF Zn ELECTRODEPOSITED ON STEEL SHEETS
- Co-author in RELATIONSHIP BETWEEN HYDROGEN ABSORPTION AND CORROSION BEHAVIOR OF ELECTROGALVANIZED STEEL SHEETS IN DRY-WET CORROSION ENVIRONMENT
Vincent Maurel
- Co-author in MICROSTRUCTURE AND TEXTURE ANALYSIS OF A NEAR-EUTECTIC Zn-Al COATING DEPOSITED ON STEEL BY HOT-DIP GALVANIZING
Kresimir Mavracic
- Co-author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Matthew McCosby
- Author in U. S. STEEL XG3 – 3rd GENERATION STEEL: CUSTOMER-FRIENDLY CHEMISTRY, PROPERTIES, AND MANUFACTURABILITY ENABLED BY UNIQUE PROCESSING
Joseph McDermid
- Co-author in A NOVEL MULTI-SLOT AIR-KNIFE DESIGN FOR LIGHTER MORE CONSISTENT COATING WEIGHTS IN THE GAS JET WIPING PROCESS
- Co-author in EFFECT OF CGL-COMPATIBLE HEAT TREATMENTS ON THE SELECTIVE OXIDATION OF A 0.15C-6Mn-2Al-1Si THIRD-GENERATION ADVANCED HIGH STRENGTH STEEL
- Co-author in EFFECT OF PROCESS ATMOSPHERE DEW POINT AND MINOR Sn ADDITION ON THE SELECTIVE OXIDATION DURING INTERCRITICAL ANNEALING OF A MEDIUM-Mn THIRD GENERATION ADVANCED HIGH STRENGTH STEEL
- Co-author in MITIGATION OF THE ADVERSE EFFECTS OF INCREASING Si CONTENT IN A CMnSi ADVANCED HIGH STRENGTH STEEL VIA CONTROLLING ANNEALING ATMOSPHERE pO2 AND MINOR Sn ADDITION DURING CONTINUOUS GALVANIZING
- Co-author in ON THE ORIGIN OF MICRO-CRACKING IN ZINC COATED PRESS HARDENED STEELS
- Co-author in REACTIVE WETTING OF MEDIUM-Mn ADVANCED HIGH-STRENGTH STEELS BY A Zn-Al-Mg BATH
Joseph McDermid
- Co-author in DEVELOPMENT OF NEW GRADES OF Zn-COATED PRESS-HARDENABLE STEEL COMPATIBLE WITH THE CONTINUOUS GALVANIZING LINE
Wanda Melfo
- Co-author in KINETICS OF WÜSTITE FORMATION IN SHORT TIME ON PURE IRON IN THE GAS MIXTURE OF CO2+CO OR H2O+H2
Stefan Melzer
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Berenice Mendonça Gonzalez
- Author in EFFECT OF THE ATMOSPHERE DEW POINT OF CONTINUOUS ANNEALING FURNACES ON THE QUALITY OF GA COATING ON BAKE HARDENING STEEL
Etienne Menigault
- Co-author in FIVES’ EYERON™, ALL-IN-ONE QUALITY MANAGEMENT SOFTWARE
Gerson Meschut Universität Paderborn - LWF
- Author in APPLICATION-ORIENTED AVOIDANCE OF LIQUID METAL EMBRITTLEMENT DURING RESISTANCE SPOT WELDING OF ZINC-COATED ADVANCED HIGH STRENGHT STEELS
Jyunpei Miki
- Co-author in STRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF TOP DROSS IN A MOLTEN ZINC BATH
Takuya Mitsunobu
- Author in PERITECTIC STRUCTURE EVOLUTION IN HOT-DIP Zn-Al ALLOY COATINGS
Daisuke Mizuno
- Co-author in APPLICATION OF DATA SCIENCE TO ATMOSPHERIC CORROSION PREDICTION
- Co-author in ATMOSPHERIC CORROSION BEHAVIOURS OF AUTOMOTIVE STEEL SHEETS EXPOSED IN EAST AND SOUTH-EAST ASIA REGIONS
Maxime Monnoyer
- Co-author in FIVES’ EYERON™, ALL-IN-ONE QUALITY MANAGEMENT SOFTWARE
Ernesto Montagna
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Dimitri Monteyne
- Co-author in QUANTITATIVE EVALUATION OF NANOSCALE MECHANICAL PROPERTIES OF Zn-Al AND Zn-Al-Mg COATINGS ON STEEL SHEET BY NANOINDENTATION
Geneviève MOREAS
- Co-author in CLEANLINESS MEASUREMENT BY INNOVATIVE LIBS METHOD
- Co-author in IN-LINE CHARACTERISATION OF THE AUSTENITE LEVEL TO ENSURE THE MECHANICAL PROPERTIES ALONG THE COIL
Seiji Morishige
- Co-author in INVESTIGATION OF "BUILD-UP" GROWTH BEHAVIOUR ON HEARTH ROLLS OF CONTINUOUS GALVANIZING LINE
Atsushi Morishita
- Co-author in DEVELOPMENT OF ONE LAYER PRE-PAINTED STEEL SHEET
- Co-author in THE EFFECT OF PHOSPHORIC ACID ADDED TO CHEMICAL CONVERSION COATING LAYER ON CORROSION PROTECTION IN SCRIBED AREAS OF ZINC-COATED STEELS
Claudia Mugrauer
- Co-author in INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
Claudia Mugrauer
- Co-author in CFD-DPM MODELLING AND ANALYSIS OF DROSS PARTICLE DYNAMICS IN HOT-DIP GALVANIZING BATHS
Andreas Muhr
- Author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
- Co-author in IN SITU INVESTIGATION OF HYDROGEN ENTRY AND HYDROGEN EMBRITTLEMENT OF ZINC-COATED HIGH STRENGTH STEELS INDUCED BY ATMOSPHERIC CORROSION
Timo Müller
- Co-author in CHARACTERIZATION OF RESIDUAL STRESSES AT SHEARED, MILLED AND LASER CUT EDGES IN MARTENSITIC STEELS
Celine Musik Arcelormittal
- Co-author in COMPARATIVE ASSESSMENT OF GI AND GA COATED AHSS LME SENSITIVITY DURING SPOT WELDING
Brahim NABI
- Co-author in INFLUENCE OF Zn-BASED COATING ALLOYS ON HYDROGEN DIFFUSION AND CORROSION RESISTANCE IN A DP STEEL
Alexandre Nadeau
- Author in IN-LINE BATH CHEMISTRY MONITORING: REVOLUTIONARY RELIABILITY OF THE NEW DIODE-BASED LASER INDUSTRIAL LIBS SENSOR
- Co-author in IN-LINE SEAM WELD INSPECTION USING LASER-ULTRASONICS: RESULTS FROM AN INDUSTRIAL TRIAL
Hiroaki Nakano
- Co-author in THE EFFECT OF PHOSPHORIC ACID ADDED TO CHEMICAL CONVERSION COATING LAYER ON CORROSION PROTECTION IN SCRIBED AREAS OF ZINC-COATED STEELS
Kazuhiro Nakatsuji
- Co-author in APPLICATION OF DATA SCIENCE TO ATMOSPHERIC CORROSION PREDICTION
Martin Niederer
- Author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Nao Ninomiya
- Co-author in EFFECT OF INITIAL VELOCITY DISTRIBUTIONS IN THE TRANSITION REGION IMPINGEMENT OF SLOT-JET
Suguru Nishinomiya
- Co-author in THE EFFECT OF PHOSPHORIC ACID ADDED TO CHEMICAL CONVERSION COATING LAYER ON CORROSION PROTECTION IN SCRIBED AREAS OF ZINC-COATED STEELS
Franck Nozahic
- Author in QUANTITATIVE EVALUATION OF NANOSCALE MECHANICAL PROPERTIES OF Zn-Al AND Zn-Al-Mg COATINGS ON STEEL SHEET BY NANOINDENTATION
- Co-author in MICROSTRUCTURE AND TEXTURE ANALYSIS OF A NEAR-EUTECTIC Zn-Al COATING DEPOSITED ON STEEL BY HOT-DIP GALVANIZING
Wolfgang Oberaigner
- Author in THROUGH-PROCESS QUALITY CONTROL (TPQC) SYSTEM - ANY DATA, ANY TIME
Se-Young Oh
- Author in Study on Corrosion Resistance and Adhesion of Paint Coated Zn-Al-Mg Galvanized Steel
- Co-author in EFFECT OF Al CONTENT ON THE CORROSION BEHAVIOR IN Mg-Zn-Al ALLOY COATED STEEL SHEET
Katsunari Oikawa
- Co-author in SEGREGATION MECHANISM OF Al-BASED OXIDES ON Zn-0.2MASS%Al HOT-DIP GALVANIZED STEEL SHEETS
Norihiko Okamoto
- Co-author in THE MECHANICAL PROPERTIES AND CRYSTAL STRUCTURE OF Fe-Zn SOLID-SOLUTION IN HOT-STAMPED GA COATING
Takashi OKE
- Author in THE BEHAVIOR OF LIQUID ZINC FLOW IN FULL SPLASHING
Masataka Omoda
- Author in APPLICATION OF DATA SCIENCE TO ATMOSPHERIC CORROSION PREDICTION
- Co-author in ATMOSPHERIC CORROSION BEHAVIOURS OF AUTOMOTIVE STEEL SHEETS EXPOSED IN EAST AND SOUTH-EAST ASIA REGIONS
Shinji Ootsuka
- Co-author in RELATIONSHIP BETWEEN HYDROGEN ABSORPTION AND CORROSION BEHAVIOR OF ELECTROGALVANIZED STEEL SHEETS IN DRY-WET CORROSION ENVIRONMENT
Jonas Östberg
- Co-author in CHARACTERIZATION OF RESIDUAL STRESSES AT SHEARED, MILLED AND LASER CUT EDGES IN MARTENSITIC STEELS
Daniella Pallisco
- Author in EFFECT OF CGL-COMPATIBLE HEAT TREATMENTS ON THE SELECTIVE OXIDATION OF A 0.15C-6Mn-2Al-1Si THIRD-GENERATION ADVANCED HIGH STRENGTH STEEL
Damon Panahi
- Co-author in EFFECT OF STEEL SUB-SURFACE STRUCTURE ON MECHANICAL PROPERTIES OF GALVANIZED 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
Smrutiranjan Parida
- Co-author in STUDY OF MANGANESE ADDITION ON THE CORROSION RESISTANCE OF GALVANIZED ZINC COATING
Bora Park
- Author in EFFECT OF Al CONTENT ON THE CORROSION BEHAVIOR IN Mg-Zn-Al ALLOY COATED STEEL SHEET
- Co-author in Study on Corrosion Resistance and Adhesion of Paint Coated Zn-Al-Mg Galvanized Steel
MinSuh Park
- Co-author in EFFECT OF ANNEALING ATMOSPHERE ON HYDROGEN EMBRITTLEMENT OF ADVANCE HIGH STRENTH STEEL
TAE JUN PARK
- Author in INFLUENCE OF SURFACE ROUGHNESS OF FULL HARD STEEL ON SPANGLE OF GALVANIZED STEEL AND ACTUAL APPLICATION RESULTS
Sun-Hong Park
- Co-author in ENHANCEMENT OF HOT DIP GALVANIZING ON AS-CAST HIGH-Mn STEEL BY FABRICATION OF FUNCTIONALLY GRADED MULTILAYERS THROUGH LASER CLADDING OF LOW CARBON STEEL
Daniel Parker
- Co-author in Zn VAPOUR INDUCED CORROSION OF 253 MA STAINLESS STEEL END PLATE AND FLANGE IN RETRACTABLE SNOUTS
Owen Pearcy
- Author in THE EVOLUTION OF COATING CONTROL SYSTEMS AS THE NEED FOR NEW COATED PRODUCTS EXPANDS
Ernst Peche
- Co-author in PREDICTION OF ANODE LIFE TIME IN ELECTRO GALVANIZING LINES BY BIG DATA ANALYSIS
Yutao Pei
- Co-author in MECHANICAL PROPERTIES AND CRACKING BEHAVIOR OF HOT-DIP GALVANIZED ZnAlMg COATINGS
Dave Penney
- Co-author in OFFLINE SIMULATION OF GALVANISING BATH JOURNAL BEARINGS AS A COST EFFECTIVE SOLUTION TO IMPROVE LINE PERFORMANCE AND MITIGATE RISK
Cédric Pérottet
- Co-author in HOW MODEL PREDICTIVE CONTROL ENHANCES STRIP TEMPERATURE REGULATION
Dan Persson
- Co-author in THE EFFECT OF MICROSTRUCTURE ON THE CORROSION STABILITY OF ZINC ALUMINIUM MAGNESIUM ALLOYED COATED STEEL IN ATMOSPHERIC CONDITIONS
Cécile PESCI
- Author in JET VAPOUR DEPOSITION: A TECHNICAL ECONOMIC ALTERNATIVE TO ELECTRO-GALVANIZING FOR Zn COATINGS OF FUTURE STEELS
Etienne PETIT
- Author in MECHANISMS STABILIZING GENERAL VAPOUR-PHASE GALVANIZING
Thomas Pfatschbacher
- Co-author in THROUGH-PROCESS OPTIMIZATION (TPO) - A MODERN APPROACH TO RAPID PRODUCT DEVELOPMENT
Herbert Pfeifer
- Co-author in DEVELOPMENT OF AN ADVANCED ULTRA-FAST COOLING SECTION
- Co-author in INCREASING LIFETIME OF METALLIC RADIANT TUBES IN VERTICAL GALVANIZING LINES
Le Quang Phan
- Author in WIPING PRESSURE DYNAMICS AND THEIR EFFECTS ON GALVANIZING COATING SMOOTHNESS
Marlies Pichler
- Co-author in SCANNING ELECTRON MICROSCOPE INVESTIGATION ON ZINC INDUCED CRACKS OF COATED PRESS HARDENED COMPONENTS
Andreas Pichler
- Co-author in QUANTITATIVE ASSESSMENT OF THE INFLUENCE OF STARTING MICROSTRUCTURE ON THE LIQUID METAL EMBRITTLEMENT SUSCEPTIBILITY OF 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
Cyril Plancq
- Author in CLEANLINESS MEASUREMENT BY INNOVATIVE LIBS METHOD
Philippe Planquart
- Author in EXPERIMENTAL AND NUMERICAL STUDY OF GAS JET COOLING AT HIGH REYNOLDS NUMBER
Jan-Friedemann Plaul
- Co-author in THROUGH-PROCESS OPTIMIZATION (TPO) - A MODERN APPROACH TO RAPID PRODUCT DEVELOPMENT
Jan Pool
- Co-author in SELECTIVE OXIDATION IN A BAKE HARDENING STEEL FOR DFF - RTF ANNEALING CYCLES
Juliana Porto Guimarães
- Author in EFFECT OF THE ATMOSPHERE DEW POINT OF CONTINUOUS ANNEALING FURNACES ON THE QUALITY OF GA COATING ON BAKE HARDENING STEEL
Narayan Pottore
- Co-author in QUANTITATIVE ASSESSMENT OF THE INFLUENCE OF STARTING MICROSTRUCTURE ON THE LIQUID METAL EMBRITTLEMENT SUSCEPTIBILITY OF 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
Maedeh Pourmajidian
- Author in REACTIVE WETTING OF MEDIUM-Mn ADVANCED HIGH-STRENGTH STEELS BY A Zn-Al-Mg BATH
Konstantin Manuel Prabitz
- Author in NUMERICAL MODEL FOR PREDICTING LIQUID METAL CRACKING DURING RESISTANCE SPOT WELDING OF ADVANCED HIGH STRENGTH STEELS
Francis Pradel
- Co-author in HOW MODEL PREDICTIVE CONTROL ENHANCES STRIP TEMPERATURE REGULATION
Tomas Prosek
- Author in IN SITU INVESTIGATION OF HYDROGEN ENTRY AND HYDROGEN EMBRITTLEMENT OF ZINC-COATED HIGH STRENGTH STEELS INDUCED BY ATMOSPHERIC CORROSION
- Co-author in ELECTROCHEMICAL BEHAVIOR OF Si PHASES IN NOVEL ZnAlMgSi COATINGS
- Co-author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
Marina Pushkareva
- Author in INFLUENCE OF INTERCRITICAL ANNEALING CYCLES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DP980 ADVANCED HIGH-STRENGTH STEEL
Alexander Reimann
- Author in APPLICATION OF A PHYSICS-BASED EMPIRICAL MODEL FOR ESTIMATION OF RADIANT TUBE TEMPERATURES IN A GALVANIZING LINE
Georg Reiss
- Author in CFD-DPM MODELLING AND ANALYSIS OF DROSS PARTICLE DYNAMICS IN HOT-DIP GALVANIZING BATHS
- Author in INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
- Co-author in FLOW PATTERN ANALYSIS INSIDE AN IMMERSING SNOUT WITH A PARAMETIC SIMULATION MODEL
- Co-author in NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS
Wayne Renshaw
- Co-author in WIPING PRESSURE DYNAMICS AND THEIR EFFECTS ON GALVANIZING COATING SMOOTHNESS
Michael Rethmeier Fraunhofer IPK
- Author in APPLICATION-ORIENTED AVOIDANCE OF LIQUID METAL EMBRITTLEMENT DURING RESISTANCE SPOT WELDING OF ZINC-COATED ADVANCED HIGH STRENGHT STEELS
Markus Ringhofer
- Author in SCHEDULING SOLUTIONS SUPPORT SUSTAINABLE PRODUCT QUALITY OF GALVANIZED COILS BY PROVIDING PRODUCTION SCHEDULES IN REPEATABLE QUALITY
Thierry Robin Fivesgroup
- Author in HOW MODEL PREDICTIVE CONTROL ENHANCES STRIP TEMPERATURE REGULATION
Ronaldo Rodrigues Vieira
- Author in EFFECT OF THE ATMOSPHERE DEW POINT OF CONTINUOUS ANNEALING FURNACES ON THE QUALITY OF GA COATING ON BAKE HARDENING STEEL
jin Kyun Roh
- Author in NEW INDUSTRIAL ACRYLIC RESIN COIL-COATING BOTH ON MECHANICALLY PATTERNED GI AND STS SHEETS
Michael Rohwerder
- Author in SCANNING KELVIN PROBE TECHNIQUES FOR THE INVESTIGATION OF CORROSION, HYDROGEN UPTAKE AND PERMEATION PROPERTIES OF ZINC ALLOY COATINGS ON STEEL
Jennifer Rolls
- Author in UNDERSTANDING THE EVOLUTION OF SURFACE OXIDES UPON DUAL PHASE STEELS DURING AN ANNEALING CYCLE
Debora Rosseel
- Co-author in QUANTITATIVE EVALUATION OF NANOSCALE MECHANICAL PROPERTIES OF Zn-Al AND Zn-Al-Mg COATINGS ON STEEL SHEET BY NANOINDENTATION
Darya Rudomilova
- Author in IN SITU INVESTIGATION OF HYDROGEN ENTRY AND HYDROGEN EMBRITTLEMENT OF ZINC-COATED HIGH STRENGTH STEELS INDUCED BY ATMOSPHERIC CORROSION
Darya Rudomilova
- Co-author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
Michael Rupp
- Author in AUTOMOTIVE INDUSTRY – QUO VADIS
Nathalie Ruscassier
- Author in SELECTIVE OXIDATION OF Fe-Mn (1WT.%) BINARY ALLOY DURING CONTINUOUS ANNEALING
Lena Ryde
- Co-author in CHARACTERIZATION OF RESIDUAL STRESSES AT SHEARED, MILLED AND LASER CUT EDGES IN MARTENSITIC STEELS
Hubert SAINT-RAYMOND
- Co-author in AN INTEGRATED METHODOLOGY FOR THE ROOT CAUSE ANALYSIS OF MECHANICAL AND METALLURGICAL DEFECTS OF HOT-DIP GALVANIZED COATINGS
Bekir Salgın
- Co-author in MECHANICAL PROPERTIES AND CRACKING BEHAVIOR OF HOT-DIP GALVANIZED ZnAlMg COATINGS
Ryo Sasaki
- Author in IN-SITU OBSERVATION OF THE CRYSTALLIZATION AND GROWTH BEHAVIOR OF Fe-Zn INTERMETALLIC COMPOUND ("BOTTOM DROSS") IN THE MOLTEN ZINC USING X-RAY TRANSMISSION IMAGING METHOD
- Co-author in INVESTIGATION OF "BUILD-UP" GROWTH BEHAVIOUR ON HEARTH ROLLS OF CONTINUOUS GALVANIZING LINE
Caesar Sasse
- Author in HOT-DIP GALVANIZING LINES - CHALLENGES AND SOLUTIONS FOR THE INDUSTRIAL PRODUCTION OF COATED 3rd GEN AUTOMOTIVE STEELS
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Rinta Sato
- Author in ATMOSPHERIC CORROSION BEHAVIOURS OF AUTOMOTIVE STEEL SHEETS EXPOSED IN EAST AND SOUTH-EAST ASIA REGIONS
Hideaki Sawada
- Co-author in STRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF TOP DROSS IN A MOLTEN ZINC BATH
Ernst Dietmar Schachinger
- Author in INFLUENCE OF OXIDE COMPOSITION AND SHOT BLASTING PARAMETERS ON SURFACE RESISTANCE OF GALVANIZED PRESS HARDENED STEELS
Gabriela Schimo-Aichhorn
- Author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
- Co-author in IN SITU INVESTIGATION OF HYDROGEN ENTRY AND HYDROGEN EMBRITTLEMENT OF ZINC-COATED HIGH STRENGTH STEELS INDUCED BY ATMOSPHERIC CORROSION
Maximilian Schleupen
- Author in DEVELOPMENT OF AN ADVANCED ULTRA-FAST COOLING SECTION
Nico Schmitz
- Author in INCREASING LIFETIME OF METALLIC RADIANT TUBES IN VERTICAL GALVANIZING LINES
- Co-author in APPLICATION OF A PHYSICS-BASED EMPIRICAL MODEL FOR ESTIMATION OF RADIANT TUBE TEMPERATURES IN A GALVANIZING LINE
Bastian Schöntaube
- Co-author in THE ROLE OF STEEL SHEET AND ITS IMPACT ON AN OUTSTANDING QUALITY PAINT USED FOR AUTOMOTIVE OUTER SKIN
Holger Schubert
- Co-author in NUMERICAL MODEL FOR PREDICTING LIQUID METAL CRACKING DURING RESISTANCE SPOT WELDING OF ADVANCED HIGH STRENGTH STEELS
Sridhar Seetharaman
- Co-author in RAPID DESIGN OF NEW Zn-Mg-Al-Sn COATINGS WITH LOW MELTING POINT FOR AUTOMOTIVE SHEET APPLICATIONS VIA MACHINE LEARNING
Vaclav Sefl
- Author in ELECTROCHEMICAL BEHAVIOR OF Si PHASES IN NOVEL ZnAlMgSi COATINGS
Denys Seguret
- Co-author in FIVES’ EYERON™, ALL-IN-ONE QUALITY MANAGEMENT SOFTWARE
Akihiro Sengoku
- Author in THE MECHANICAL PROPERTIES AND CRYSTAL STRUCTURE OF Fe-Zn SOLID-SOLUTION IN HOT-STAMPED GA COATING
Pace Sergio CRM group
- Co-author in JET VAPOUR DEPOSITION: A TECHNICAL ECONOMIC ALTERNATIVE TO ELECTRO-GALVANIZING FOR Zn COATINGS OF FUTURE STEELS
Nega Setargew
- Author in SPANGLE NUCLEATION AND REFINEMENT THEORY IN 55%Al-Zn COATED STEEL
- Author in Zn VAPOUR INDUCED CORROSION OF 253 MA STAINLESS STEEL END PLATE AND FLANGE IN RETRACTABLE SNOUTS
Ghazal Seyed Mousavi
- Author in MITIGATION OF THE ADVERSE EFFECTS OF INCREASING Si CONTENT IN A CMnSi ADVANCED HIGH STRENGTH STEEL VIA CONTROLLING ANNEALING ATMOSPHERE pO2 AND MINOR Sn ADDITION DURING CONTINUOUS GALVANIZING
Hannes Seyrkammer
- Co-author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Fumio Shibao
- Co-author in DEVELOPMENT OF ONE LAYER PRE-PAINTED STEEL SHEET
Mina Shibata
- Co-author in STRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF TOP DROSS IN A MOLTEN ZINC BATH
Barbara Shollock
- Co-author in UNDERSTANDING THE EVOLUTION OF SURFACE OXIDES UPON DUAL PHASE STEELS DURING AN ANNEALING CYCLE
Robert Sierlinger
- Co-author in NUMERICAL MODEL FOR PREDICTING LIQUID METAL CRACKING DURING RESISTANCE SPOT WELDING OF ADVANCED HIGH STRENGTH STEELS
Eric SILBERBERG
- Co-author in JET VAPOUR DEPOSITION: A TECHNICAL ECONOMIC ALTERNATIVE TO ELECTRO-GALVANIZING FOR Zn COATINGS OF FUTURE STEELS
Eduardo Silva
- Author in U. S. STEEL XG3 – 3rd GENERATION STEEL: CUSTOMER-FRIENDLY CHEMISTRY, PROPERTIES, AND MANUFACTURABILITY ENABLED BY UNIQUE PROCESSING
- Co-author in NORTH AMERICAN DEVELOPMENTS AND OPPORTUNITIES FOR GALVANIZED STEEL SHEET
Pertti Sippola
- Author in UNIQUE SIMULTANEOUS RAPID COOLING AND ZINC COATING TECHNOLOGY - NO BAINITE BEFORE ZINC POT
Wim Sloof
- Co-author in KINETICS OF WÜSTITE FORMATION IN SHORT TIME ON PURE IRON IN THE GAS MIXTURE OF CO2+CO OR H2O+H2
Roland Jan Snijders
- Co-author in FEEDING TECHNOLOGY FOR A CONTINUOUS PVD COATING LINE
Il Ryoung Sohn
- Co-author in ANTI-CORROSION PERFORMANCE OF ZnMg AND ZnMgAl-COATED STEELS FOR AUTOMOTIVE APPLICATIONS
- Co-author in INVESTIGATION OF HOT-DIP ZnMgAl COATINGS FOR AUTOMOTIVE APPLICATIONS
Ulrich Sommers
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
John Speer
- Co-author in QUANTITATIVE ASSESSMENT OF THE INFLUENCE OF STARTING MICROSTRUCTURE ON THE LIQUID METAL EMBRITTLEMENT SUSCEPTIBILITY OF 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
- Co-author in RAPID DESIGN OF NEW Zn-Mg-Al-Sn COATINGS WITH LOW MELTING POINT FOR AUTOMOTIVE SHEET APPLICATIONS VIA MACHINE LEARNING
Thomas Steck
- Co-author in IMPACT OF SURFACE TOPOGRAPHY OF ELECTRO GALVANIZED STEEL SHEET ON PAINT APPEARANCE
- Co-author in NANOSCALE STRUCTURE AND COMPOSITIONAL ANALYSIS OF SURFACE OXIDES ON HOT-DIP GALVANIZED PRESS-HARDENED STEEL
- Co-author in PREDICTION OF ANODE LIFE TIME IN ELECTRO GALVANIZING LINES BY BIG DATA ANALYSIS
Mihaela Stefan-Kharicha
- Co-author in NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS
Mihaela Stefan-Kharicha
- Co-author in INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
Andreas Steinboeck
- Co-author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Karl-Heinz Stellnberger
- Co-author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
David Stifter
- Co-author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
- Co-author in NANOSCALE INVESTIGATION OF GRAIN BOUNDARY WETTING AND MICRO CRACKS OF PRESS HARDENED GALVANIZED 20MnB8 STEEL
Markus Straub
- Co-author in INFLUENCE OF OXIDE COMPOSITION AND SHOT BLASTING PARAMETERS ON SURFACE RESISTANCE OF GALVANIZED PRESS HARDENED STEELS
Stephan Strommer
- Co-author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Johann Strutzenberger
- Co-author in CFD-DPM MODELLING AND ANALYSIS OF DROSS PARTICLE DYNAMICS IN HOT-DIP GALVANIZING BATHS
- Co-author in FLOW PATTERN ANALYSIS INSIDE AN IMMERSING SNOUT WITH A PARAMETIC SIMULATION MODEL
Gerhard Stuermer
- Co-author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Fatima Suleiman
- Co-author in EFFECT OF ANNEALING ATMOSPHERE AND STEEL ALLOY COMPONENTS ON SURFACE TOPOGRAPHY AND RADIATIVE PROPERTIES OF ADVANCED HIGH STRENGTH STEEL STRIP DURING CONTINUOUS GALVANIZING
Weiping Sun
- Co-author in DEVELOPMENT OF A Zn-Al-Mn-Sb ALLOY COATING FOR PRESS HARDENABLE STEELS
Asuka Suzuki
- Co-author in FORMATION SEQUENCE OF Fe-Al INTERMETALLIC PHASES IN HOT-DIP Zn-Al-Mg ALLOY GALVANIZED STEELS
Yuki Suzuki
- Author in THE EFFECT OF PHOSPHORIC ACID ADDED TO CHEMICAL CONVERSION COATING LAYER ON CORROSION PROTECTION IN SCRIBED AREAS OF ZINC-COATED STEELS
Shoichiro Taira
- Co-author in EFFECT OF THIOGLYCOLIC ACID ON THE MORPHOLOGY OF Zn ELECTRODEPOSITED ON STEEL SHEETS
- Co-author in SEGREGATION MECHANISM OF Al-BASED OXIDES ON Zn-0.2MASS%Al HOT-DIP GALVANIZED STEEL SHEETS
Hideyuki takahashi
- Co-author in EFFECT OF INITIAL VELOCITY DISTRIBUTIONS IN THE TRANSITION REGION IMPINGEMENT OF SLOT-JET
Naoki Takata
- Author in FORMATION SEQUENCE OF Fe-Al INTERMETALLIC PHASES IN HOT-DIP Zn-Al-Mg ALLOY GALVANIZED STEELS
Hiroshi Takebayashi
- Co-author in THE MECHANICAL PROPERTIES AND CRYSTAL STRUCTURE OF Fe-Zn SOLID-SOLUTION IN HOT-STAMPED GA COATING
Yuki Takeda
- Author in THE PROPOSAL FOR IMPROVEMENT OF INTERSTITIAL FREE STEEL MECHANICAL PROPERTIES IN CGL PROCESS
Gentaro Takeda
- Author in EFFECT OF INITIAL VELOCITY DISTRIBUTIONS IN THE TRANSITION REGION IMPINGEMENT OF SLOT-JET
Tobias Terlau
- Co-author in ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Matti Teschner
- Co-author in SIMULATION AND OPTIMISATION OF A WIPING KNIFE ON THE LAB SCALE
Emanuel Thienpont
- Co-author in NON STICKING FURNACE ROLLS FOR STEEL PRODUCTS TO IMPROVE SERVICE LIFE AND PRODUCT QUALITY IN CONTINUOUS ANNEALING AND GALVANIZING LINES: PRELIMINARY STUDY ON CHEMICAL INTERACTIONS AND PICKUP MECHANISM
dominique thierry
- Author in INFLUENCE OF MINOR ADDITION OF Si AND Ti ON THE CORROSION PERFORMANCE OF ZM COATED STEEL
- Author in RECENT ADVANCE IN CORROSION MONITORING OF ATMOSPHERIC CORROSION OF GALVANISED STEEL AND ZINC ALLOYED COATED STEEL
- Co-author in THE EFFECT OF MICROSTRUCTURE ON THE CORROSION STABILITY OF ZINC ALUMINIUM MAGNESIUM ALLOYED COATED STEEL IN ATMOSPHERIC CONDITIONS
Chris Thomsen
- Author in DEVELOPMENT OF NEW GRADES OF Zn-COATED PRESS-HARDENABLE STEEL COMPATIBLE WITH THE CONTINUOUS GALVANIZING LINE
Kouhei Tokuda
- Co-author in PERITECTIC STRUCTURE EVOLUTION IN HOT-DIP Zn-Al ALLOY COATINGS
Melanie Tomasch
- Author in SCANNING ELECTRON MICROSCOPE INVESTIGATION ON ZINC INDUCED CRACKS OF COATED PRESS HARDENED COMPONENTS
kunihiko toshin
- Author in DEVELOPMENT OF ONE LAYER PRE-PAINTED STEEL SHEET
Raluca A. Trasca
- Co-author in CFD-DPM MODELLING AND ANALYSIS OF DROSS PARTICLE DYNAMICS IN HOT-DIP GALVANIZING BATHS
Raluca Andreea Trasca
- Co-author in INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
Ines Traxler
- Author in INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
Tia Truglas
- Co-author in NANOSCALE INVESTIGATION OF GRAIN BOUNDARY WETTING AND MICRO CRACKS OF PRESS HARDENED GALVANIZED 20MnB8 STEEL
- Co-author in NANOSCALE STRUCTURE AND COMPOSITIONAL ANALYSIS OF SURFACE OXIDES ON HOT-DIP GALVANIZED PRESS-HARDENED STEEL
Kazuaki Tsuchimoto
- Author in EFFECT OF THIOGLYCOLIC ACID ON THE MORPHOLOGY OF Zn ELECTRODEPOSITED ON STEEL SHEETS
Kohei UEDA
- Co-author in DEVELOPMENT OF ADVANCED PRE-PAINTED Zn-11%Al-3Mg-0.2%Si COATED STEEL SHEETS
- Co-author in DEVELOPMENT OF ONE LAYER PRE-PAINTED STEEL SHEET
- Co-author in THE EFFECT OF BONDING STATE BETWEEN THE GALVANIZED STEEL SHEETS AND THE ADHESIVE ON DETERIORATION BEHAVIOR OF ADHESIVE JOINT
Harald Unger
- Author in FLOW PATTERN ANALYSIS INSIDE AN IMMERSING SNOUT WITH A PARAMETIC SIMULATION MODEL
- Co-author in CFD-DPM MODELLING AND ANALYSIS OF DROSS PARTICLE DYNAMICS IN HOT-DIP GALVANIZING BATHS
- Co-author in INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
Hideya Uoya
- Co-author in EFFECT OF INITIAL VELOCITY DISTRIBUTIONS IN THE TRANSITION REGION IMPINGEMENT OF SLOT-JET
Kohsaku USHIODA
- Co-author in STRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF TOP DROSS IN A MOLTEN ZINC BATH
Remi Valentin
- Author in WIPING PILOT USE FOR BAFFLE DESIGNS AND SETUP IMPROVEMENTS
Krista Van den Bergh
- Co-author in QUANTITATIVE EVALUATION OF NANOSCALE MECHANICAL PROPERTIES OF Zn-Al AND Zn-Al-Mg COATINGS ON STEEL SHEET BY NANOINDENTATION
Xavier VANDEN EYNDE
- Co-author in INFLUENCE OF Zn-BASED COATING ALLOYS ON HYDROGEN DIFFUSION AND CORROSION RESISTANCE IN A DP STEEL
Ellen van der Aa
- Co-author in QUANTITATIVE ASSESSMENT OF THE INFLUENCE OF STARTING MICROSTRUCTURE ON THE LIQUID METAL EMBRITTLEMENT SUSCEPTIBILITY OF 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
Jaap van Eenennaam
- Author in EASY ANALYSIS OF AIR KNIFE PERFORMANCE BY STATIONARY FLOW CALCULATIONS
Bart van Veldhuizen
- Author in AN INNOVATIVE GI WITH IMPROVED GALLING AND SURFACE PROPERTIES FOR EXPOSED AUTOMOTIVE APPLICATIONS
Pavan Venkatasurya
- Co-author in EFFECT OF STEEL SUB-SURFACE STRUCTURE ON MECHANICAL PROPERTIES OF GALVANIZED 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
Philippe Verpoort
- Author in ZnAlMg METALLIC COATINGS IN HARSH ENVIRONMENTS: A COMPARATIVE AND CHALLENGING STUDY
Patrice VICENTE-HERNANDEZ
- Co-author in HDG POT PRODUCTIVITY
Tiberius Vilics
- Co-author in NON STICKING FURNACE ROLLS FOR STEEL PRODUCTS TO IMPROVE SERVICE LIFE AND PRODUCT QUALITY IN CONTINUOUS ANNEALING AND GALVANIZING LINES: PRELIMINARY STUDY ON CHEMICAL INTERACTIONS AND PICKUP MECHANISM
Matteo Volpato
- Author in EFFICIENT AND EFFECTIVE OPERATION OF A HOT DIP GALVANIZING LINE
Jurgen Vrenken
- Co-author in AN INNOVATIVE GI WITH IMPROVED GALLING AND SURFACE PROPERTIES FOR EXPOSED AUTOMOTIVE APPLICATIONS
Raja V. S.
- Co-author in STUDY OF MANGANESE ADDITION ON THE CORROSION RESISTANCE OF GALVANIZED ZINC COATING
Christoph Wagner
- Co-author in INFLUENCE OF OXIDE COMPOSITION AND SHOT BLASTING PARAMETERS ON SURFACE RESISTANCE OF GALVANIZED PRESS HARDENED STEELS
Jikang Wang
- Co-author in SIMULATION AND OPTIMISATION OF A WIPING KNIFE ON THE LAB SCALE
Dominik Weirich
- Co-author in SIMULATION AND OPTIMISATION OF A WIPING KNIFE ON THE LAB SCALE
Geoff West
- Co-author in UNDERSTANDING THE EVOLUTION OF SURFACE OXIDES UPON DUAL PHASE STEELS DURING AN ANNEALING CYCLE
Ruud Westerwaal
- Co-author in UNDERSTANDING THE EVOLUTION OF SURFACE OXIDES UPON DUAL PHASE STEELS DURING AN ANNEALING CYCLE
Stephen James Widdis
- Co-author in FEEDING TECHNOLOGY FOR A CONTINUOUS PVD COATING LINE
Marco Witte
- Co-author in INFLUENCE OF ELECTROLYTE COMPOSITION AND TEMPERATURE ON ENERGY DEMAND AND ZINC STRUCTURE DURING ELECTRO-GALVANIZING
Jan Wormann
- Co-author in SELECTIVE OXIDATION IN A BAKE HARDENING STEEL FOR DFF - RTF ANNEALING CYCLES
Johan Wullink
- Co-author in SIMULATION OF FLASH PRE-OXIDATION IN AN ANNEALING SIMULATOR
Christian Wuppermann
- Co-author in DEVELOPMENT OF AN ADVANCED ULTRA-FAST COOLING SECTION
Ali Yahyaee Soufiani
- Author in A NOVEL MULTI-SLOT AIR-KNIFE DESIGN FOR LIGHTER MORE CONSISTENT COATING WEIGHTS IN THE GAS JET WIPING PROCESS
Shunsuke Yamamoto
- Author in ANALYSIS OF COSMETIC CORROSION BEHAVIOR BY IN-SITU OBSERVATION IN WET AND DRY CONDITIONS
- Co-author in ATMOSPHERIC CORROSION BEHAVIOURS OF AUTOMOTIVE STEEL SHEETS EXPOSED IN EAST AND SOUTH-EAST ASIA REGIONS
Kenji yamashiro
- Co-author in EFFECT OF INITIAL VELOCITY DISTRIBUTIONS IN THE TRANSITION REGION IMPINGEMENT OF SLOT-JET
Robert Yanik
- Co-author in THE ROLE OF STEEL SHEET AND ITS IMPACT ON AN OUTSTANDING QUALITY PAINT USED FOR AUTOMOTIVE OUTER SKIN
Sergey Yashchuk
- Author in OPTIMAL CONTENT OF ALUMINUM IN ALUMINUM-ZINC ALLOY IN HOT-DIP COATING ON THE STEEL STRIP
Hideyuki Yasuda
- Co-author in IN-SITU OBSERVATION OF THE CRYSTALLIZATION AND GROWTH BEHAVIOR OF Fe-Zn INTERMETALLIC COMPOUND ("BOTTOM DROSS") IN THE MOLTEN ZINC USING X-RAY TRANSMISSION IMAGING METHOD
Lluis Yedra Cardona
- Co-author in SELECTIVE OXIDATION OF Fe-Mn (1WT.%) BINARY ALLOY DURING CONTINUOUS ANNEALING
Hiroki Yokoi
- Co-author in FORMATION SEQUENCE OF Fe-Al INTERMETALLIC PHASES IN HOT-DIP Zn-Al-Mg ALLOY GALVANIZED STEELS
Yun Ha Yoo
- Author in ANTI-CORROSION PERFORMANCE OF ZnMg AND ZnMgAl-COATED STEELS FOR AUTOMOTIVE APPLICATIONS
Suk Jong Yoo
- Co-author in ANTI-CORROSION PERFORMANCE OF ZnMg AND ZnMgAl-COATED STEELS FOR AUTOMOTIVE APPLICATIONS
Kintak Raymond Yu
- Author in A MODELING FRAMEWORK FOR TOP SKIMMING FORMATION IN GALVANIZING BATH
Nicoletta Zacchetti RINA-Centro Sviluppo Materiali SpA
- Author in NON STICKING FURNACE ROLLS FOR STEEL PRODUCTS TO IMPROVE SERVICE LIFE AND PRODUCT QUALITY IN CONTINUOUS ANNEALING AND GALVANIZING LINES: PRELIMINARY STUDY ON CHEMICAL INTERACTIONS AND PICKUP MECHANISM
DAVID ZAPICO ALVAREZ
- Author in COMPARATIVE ASSESSMENT OF GI AND GA COATED AHSS LME SENSITIVITY DURING SPOT WELDING
Paul Zeman
- Co-author in NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Qi-fug ZHANG
- Author in DEVELOPMENT OF ZINC AND ZINC-ALLOY COATED STEEL SHEET IN CHINA
Weimin Zhong
- Author in SNOUT TEMPERATURE PREDICTIVE MODEL AND Zn POT THERMAL BALANCE
Samir Ziada
- Co-author in A NOVEL MULTI-SLOT AIR-KNIFE DESIGN FOR LIGHTER MORE CONSISTENT COATING WEIGHTS IN THE GAS JET WIPING PROCESS
Edzo Zoestbergen
- Author in FEEDING TECHNOLOGY FOR A CONTINUOUS PVD COATING LINE
- Co-author in UNDERSTANDING THE EVOLUTION OF SURFACE OXIDES UPON DUAL PHASE STEELS DURING AN ANNEALING CYCLE
Marga Zuijderwijk
- Author in SIMULATION OF FLASH PRE-OXIDATION IN AN ANNEALING SIMULATOR
- Co-author in SELECTIVE OXIDATION IN A BAKE HARDENING STEEL FOR DFF - RTF ANNEALING CYCLES