|
12:30
|
--- Break ---
|
|
14:00
|
Automotive Applications - Zn and ZnFe Coatings
-Mr
Katsuya Hoshino
(JFE Steel Corporation)
Dr
Bekir Salgin
(Tata Steel Europe)
(until 15:40)
(Room A)
|
|
14:00
|
STRESS CORROSION CRACKING OF HOT FORMING STEELS
- Dr
Carsten Lachmann
(Volkswagen Aktiengesellschaft)
(Room A)
|
|
14:20
|
THE ROLE OF STEEL SHEET AND ITS IMPACT ON AN OUTSTANDING QUALITY PAINT USED FOR AUTOMOTIVE OUTER SKIN
-
Friedhelm Macherey
(thyssenkrupp Steel Europe AG)
(Room A)
|
|
14:40
|
Next Generation EDT Technology
-
Chris Childs
(Sarclad)
(Room A)
|
|
15:00
|
THE EFFECT OF BONDING STATE BETWEEN THE GALVANIZED STEEL SHEETS AND THE ADHESIVE ON DETERIORATION BEHAVIOR OF ADHESIVE JOINT
-
Masumi Koori
(Nipponsteel)
(Room A)
|
|
15:20
|
AN INNOVATIVE GI WITH IMPROVED GALLING AND SURFACE PROPERTIES FOR EXPOSED AUTOMOTIVE APPLICATIONS
-
Bart van Veldhuizen
(Tata Steel Europe)
(Room A)
|
|
14:00
|
Furnace II - Current Topics from Preoxidation to Galvannealing
-
Michel Renard
(DREVER International S.A.)
Hubert Saint Raymond
(Arcelormittal)
(until 15:40)
(Room B)
|
|
14:20
|
SIMULATION OF FLASH PRE-OXIDATION IN AN ANNEALING SIMULATOR
-
Marga Zuijderwijk
(Tata Steel)
(Room B)
|
|
14:40
|
ArcelorMittal GENT PRODUCES 3rd GEN. AHSS INCL. Q&P ON THE UNIQUE ANNEALING FURNACE FROM ANDRITZ
-
Martin Hamman
(ANDRITZ)
Ann De Boeck
(ArcelorMittal Belgium)
(Room B)
|
|
15:00
|
MULTILAYER ANGULAR ROLL MODEL FOR ONLINE CONTINUOUS CONTROL OF GALVANIZING LINES DRIVEN BY FURNACE MATHEMATICAL MODEL
-
Alexandre Lhoest
(Drever International)
(Room B)
|
|
14:00
|
Steel-Coating Interfacial Layer and Coating Phase Developments
-
Thomas Mörtlbauer
(voestalpine)
(until 15:40)
(Room C)
|
|
14:00
|
FORMATION SEQUENCE OF Fe-Al INTERMETALLIC PHASES IN HOT-DIP Zn-Al-Mg ALLOY GALVANIZED STEELS
-
Naoki Takata
(Nagoya University)
(Room C)
|
|
14:20
|
QUANTITATIVE EVALUATION OF NANOSCALE MECHANICAL PROPERTIES OF Zn-Al AND Zn-Al-Mg COATINGS ON STEEL SHEET BY NANOINDENTATION
-
Franck Nozahic
(ArcelorMittal Global R&D Ghent)
(Room C)
|
|
14:40
|
IN-SITU OBSERVATION OF THE CRYSTALLIZATION AND GROWTH BEHAVIOR OF Fe-Zn INTERMETALLIC COMPOUND ("BOTTOM DROSS") IN THE MOLTEN ZINC USING X-RAY TRANSMISSION IMAGING METHOD
-
Ryo Sasaki
(kobe steel, ltd.)
(Room C)
|
|
15:00
|
STRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF TOP DROSS IN A MOLTEN ZINC BATH
-
Takeshi Konishi
(Nippon Steel)
(Room C)
|
|
15:20
|
INVESTIGATION OF ORANGE PEEL DEFECT ON GALVANIZED DP STEEL SHEET
-
Lei Cui
(Maanshan Iron & Steel Company Ltd,)
(Room C)
|
|
15:40
|
--- Break ---
|
|
16:10
|
Furnace III - Rapid Cooling, Furnace Roll Coatings
-
Juliana GUIMARÃES Dr
Gerhard Angeli
(until 17:30)
(Room B)
|
|
16:10
|
EXPERIMENTAL AND NUMERICAL STUDY OF GAS JET COOLING AT HIGH REYNOLDS NUMBER
- Mr
MICHEL DUBOIS
(CMI INDUSTRY)
(Room B)
|
|
16:30
|
INVESTIGATION OF "BUILD-UP" GROWTH BEHAVIOUR ON HEARTH ROLLS OF CONTINUOUS GALVANIZING LINE
-
Sho Katsura
(KOBE STEEL, LTD)
(Room B)
|
|
16:50
|
NON STICKING FURNACE ROLLS FOR STEEL PRODUCTS TO IMPROVE SERVICE LIFE AND PRODUCT QUALITY IN CONTINUOUS ANNEALING AND GALVANIZING LINES: PRELIMINARY STUDY ON CHEMICAL INTERACTIONS AND PICKUP MECHANISM
-
Nicoletta Zacchetti
(RINA-Centro Sviluppo Materiali SpA)
(Room B)
|
|
17:10
|
DEVELOPMENT OF AN ADVANCED ULTRA-FAST COOLING SECTION
-
Maximilian Schleupen
(Department for Industrial Furnaces and Heat Engineering, RWTH Aachen University)
(Room B)
|
|
16:10
|
Future Aspects of Automotive and Steel Industry
-
Nathalie Ruscassier
John Speer
(until 17:30)
(Room A)
|
|
16:10
|
AUTOMOTIVE INDUSTRY – QUO VADIS
- Prof.
Michael Rupp
(Room A)
|
|
16:30
|
WAYS TO REDUCE CO2 EMISSIONS IN IRON AND STEELMAKING IN EUROPE
-
Hans-Bodo Lüngen
(Executive Member of the Managing Board, VDEh)
(Room A)
|
|
16:10
|
Non-Automotive Applications: ZnAlMg Coatings and in-line Pre-painted Electrogalvanized Steel
-Prof.
Joseph McDermid
(McMaster University)
Dr
MOON HONG
(POSCO C&C)
(until 17:30)
(Room C)
|
|
16:10
|
MECHANICAL PROPERTIES AND CRACKING BEHAVIOR OF HOT-DIP GALVANIZED ZnAlMg COATINGS
-
Masoud Ahmadi
(Department of Advanced Production Engineering, University of Groningen)
(Room C)
|
|
16:30
|
DEVELOPMENT OF ADVANCED PRE-PAINTED Zn-11%Al-3Mg-0.2%Si COATED STEEL SHEETS
-
Taihei Kaneto
(Nippon Steel Corporation)
(Room C)
|
|
16:50
|
DEVELOPMENT OF ONE LAYER PRE-PAINTED STEEL SHEET
-
Kunihiko Toshin
(NIPPON STEEL CORPORATION)
(Room C)
|
|
17:30
|
Poster Session
(until 18:11)
()
|
|
17:30
|
INFLUENCE OF INTERCRITICAL ANNEALING CYCLES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DP980 ADVANCED HIGH-STRENGTH STEEL
- Dr
Paul R. Provencher
(Polytechnique Montreal)
()
|
|
17:32
|
THE PROPOSAL FOR IMPROVEMENT OF INTERSTITIAL FREE STEEL MECHANICAL PROPERTIES IN CGL PROCESS
-
Yuki Takeda
(JFE Steel)
()
|
|
17:34
|
EFFECT OF THE ATMOSPHERE DEW POINT OF CONTINUOUS ANNEALING FURNACES ON THE QUALITY OF GA COATING ON BAKE HARDENING STEEL
-
Juliana Porto Guimarães
(Usiminas)
()
|
|
17:36
|
Study on Corrosion Resistance and Adhesion of Paint Coated Zn-Al-Mg Galvanized Steel
- Ms
Se-Young Oh
(POMIA (Pohang Institute of Metal Industry Advancement))
()
|
|
17:38
|
DEVELOPMENT OF NEW Al COATED STEEL WITHOUT LME CRACKS AND EXCELLENT CORROSION
-
Suk Kyu Lee
(POSCO Technical Research Lab.)
()
|
|
17:40
|
KINETICS OF WÜSTITE FORMATION IN SHORT TIME ON PURE IRON IN THE GAS MIXTURE OF CO2+CO OR H2O+H2
-
Soroush Aghaeian
(Department of Materials Science and Engineering, Delft University of Technology)
()
|
|
17:42
|
NEW INDUSTRIAL ACRYLIC RESIN COIL-COATING BOTH ON MECHANICALLY PATTERNED GI AND STS SHEETS
-
Moon Hi Hong
(POSCO C&C)
()
|
|
17:44
|
INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
-
Georg Reiss
(Materials Center Leoben)
()
|
|
17:46
|
NEW ZnAlMg ALLOY COATINGS WITH ULTRA HIGH CORROSION RESISTANCE
-
HEUNG YUN KIM
(POSCO / Technical Research Laboratories)
()
|
|
17:48
|
AN OPTIMIZATION OF SPANGLE MINIMIZER FOR Al-Si COATED STEEL SPANGLE CONTROL
-
Jong Beom Lee
(HYUNDAI STEEL)
()
|
|
17:50
|
FAST AND NON-DESTRUCTIVE METHOD FOR PHASE QUANTIFICATION IN ZINC ALLOYED COATED STEEL SHEET
-
Hugues Guerault
(Bruker AXS, GmbH)
()
|
|
17:52
|
HOW MODEL PREDICTIVE CONTROL ENHANCES STRIP TEMPERATURE REGULATION
-
Thierry Robin
(Fivesgroup)
()
|
|
17:54
|
EFFECT OF Al CONTENT ON THE CORROSION BEHAVIOR IN Mg-Zn-Al ALLOY COATED STEEL SHEET
-
Bora Park
(POMIA (Pohang Institute of Metal Industry Advancement))
()
|
|
17:56
|
THROUGH-PROCESS QUALITY CONTROL (TPQC) SYSTEM - ANY DATA, ANY TIME
-
Can Ergun
(Primetals Technologies Austria GmbH)
()
|
|
17:58
|
SCHEDULING SOLUTIONS SUPPORT SUSTAINABLE PRODUCT QUALITY OF GALVANIZED COILS BY PROVIDING PRODUCTION SCHEDULES IN REPEATABLE QUALITY
-
Markus Ringhofer
(Primetals Technologies Austria)
()
|
|
18:00
|
SIMULATION AND OPTIMISATION OF A WIPING KNIFE ON THE LAB SCALE
-
Tobias Klinkberg
(Salzgitter Mannesmann Forschung)
()
|
|
18:02
|
NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS
-
Georg Reiss
(MCL)
()
|
|
18:04
|
IN-LINE SEAM WELD INSPECTION USING LASER-ULTRASONICS: RESULTS FROM AN INDUSTRIAL TRIAL
- Mr
Alexandre Nadeau
(Tecnar Automation Ltee)
()
|
