Metal Additive Manufacturing Conference - MAMC 2021

Name: Metal Additive Manufacturing Conference - MAMC 2021
Start: 2021-11-03T08:00:00+01:00
End: 2021-11-05T18:00:00+01:00
Location: Wirtschaftskammer Österreich

3-5 November 2021

Wirtschaftskammer Österreich

Europe/Vienna timezone

Conference Secretary

Author List

Mihaela Albu
- Author in Correlative microstructure investigations of additive manufactured parts
Sasan Amirabdollahian University of Trento
- Author in Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Thomas Ammann
- Co-author in Cracking behavior of a Zr-blended aluminum 7075 alloy processed by laser-based powder bed fusion under argon and nitrogen and various argon-nitrogen mixtures
Sebastian Aagaard Andersen Technical University of Denmark
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Henrik Andersson Uddeholm AB
- Author in Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
Markus Apel
- Co-author in Computational design of high γ′ nickel-based superalloys for laser powder bed fusion
Enrique Ariza
- Co-author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Siegfried Arneitz
- Author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Mikael Åsberg
- Author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Patrick Aschauer
- Co-author in Metal Additive Manufacturing via Powder Layer Fusion Technology
PASCAL AUBRY
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Stefan Augl University of Applied Sciences Upper Austria
- Co-author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
Christin Aumayr
- Co-author in Investigation of microstructure and cracking prevention of M4 HSS processed by selective laser melting
Siegfried Baehr
- Author in Cracking behavior of a Zr-blended aluminum 7075 alloy processed by laser-based powder bed fusion under argon and nitrogen and various argon-nitrogen mixtures
Bassem Barkia
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Dominik Bauer
- Author in Process gas and its influence on additive manufactured AlSi10Mg
Mirnes Berbic
- Author in Thermomechanical and thermochemical endurance of hot work tool steels and PVD-coatings for high pressure die casting
Martin Bielik
- Co-author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Sabine Bodner
- Author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Marie-Noemi Bold
- Author in Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stresses of IN718 Thin-Walled Structures
- Author in Investigation of Cooling Rate and Microstructure with the Aim of Alloy Development using Extreme High Speed Laser Material Deposition (EHLA) exemplified by 316L
Eugen Boos
- Co-author in Topology optimized unit cells for laser powder bed fusion
Anderson Borille Instituto Tecnológico de Aeronáutica
- Author in Residual stress heterogeneity induced by SLM of carburizing steel 20MnCr5 and its influence on contact fatigue
Paolo Bosetti University of Trento
- Co-author in Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Michal Brázda
- Co-author in Mechanical properties of Additively manufactured builds from maraging steel
Florian Brumbauer
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Tobias Brune
- Author in Intelligent powder production: Data-driven optimization of productivity
Marco Bruns
- Co-author in Topology optimized unit cells for laser powder bed fusion
Ricardo Buzolin
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Jeppe Byskov Danish Technological Institute
- Author in Creating Competitive Metal AM Production with High Volume and Flexibility Based on Digital Twins
Kevin Cardoso
- Co-author in Solvent on Granules 3D-Printing of WC-12Co Cemented Carbide Parts
Efrain Carreño-Morelli
- Author in Solvent on Granules 3D-Printing of WC-12Co Cemented Carbide Parts
Riccardo Casati
- Co-author in Effect of post-processing thermal treatments on fatigue resistance of additively manufactured 18Ni300 maraging steel
Philippe Castany
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Stanislav Chernyshikhin
- Author in Study on the selective laser melting of aluminum matrix composites reinforced with AlN particles
GUY CHEYMOL
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Thomas Christiansen Technical University of Denmark (DTU), Department of Mechanical Engineering
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Juergen Cornelius
- Author in A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook
Charlotte Cui
- Co-author in Crack Mechanism Analysis of a Laser Powder Bed Fused Carbon-Free FeCoMo Alloy
Harris Daniel
- Co-author in ICME-based approach to correlate residual stress generation with micro-structural evolution and solidification cracking during laser powder bed fusion process
Herbert Danninger Technische Universität Wien
- Co-author in Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester
Erik Dartfeldt RISE
- Author in Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
Paul A Davies
- Co-author in Effect of post-processing thermal treatments on fatigue resistance of additively manufactured 18Ni300 maraging steel
Faraz deirmina
- Author in Effect of post-processing thermal treatments on fatigue resistance of additively manufactured 18Ni300 maraging steel
- Author in Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Timothée Delacroix
- Author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
Martin Dopler
- Author in Energy efficient production of spherical powders for DMLS Applications
Welf-Guntram Drossel
- Co-author in Topology optimized unit cells for laser powder bed fusion
Jan Dzugan COMTES FHT Inc.
- Author in Characterization of local fracture properties of DED deposited multiple material components
Beatrix Elsner
- Author in Topology optimized unit cells for laser powder bed fusion
Strandh Emil
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Alper Evirgen
- Co-author in Cracking behavior of a Zr-blended aluminum 7075 alloy processed by laser-based powder bed fusion under argon and nitrogen and various argon-nitrogen mixtures
Leandro Feitosa
- Author in Microstructure and mechanical performance of Sandvik Osprey Inconel 625 produced via laser powder bed fusion
Stephen Fitzpatrick AFRC, NMIS
- Author in Process modelling and realization for laser-metal powder additive manufacturing
Gunnel Fredriksson
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Jean-Paul Garandet
- Co-author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
Johannes Gardstam
- Co-author in Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V
Marco Gehrig
- Co-author in Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V
Christian Gierl-Mayer Technische Universität Wien
- Co-author in Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester
Pierre-François Giroux
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Rudolf Gradinger
- Author in Integration of electrical conductors into metallic structures by DED technologies
Witalij Gridin
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
Stefan Griesser
- Author in Metal Additive Manufacturing via Powder Layer Fusion Technology
Alexander Gromov
- Co-author in Study on the selective laser melting of aluminum matrix composites reinforced with AlN particles
Harald Gschiel FOTEC
- Co-author in Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester
Reinhold Gschwandtner
- Co-author in Thermomechanical and thermochemical endurance of hot work tool steels and PVD-coatings for high pressure die casting
Franz Haas
- Co-author in Metal Additive Manufacturing via Powder Layer Fusion Technology
Christian Haase
- Co-author in Computational design of high γ′ nickel-based superalloys for laser powder bed fusion
Nima Haghdadi
- Co-author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Uwe Haissl
- Co-author in A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook
V S Hariharan
- Author in Simulation of microstructural evolution during additive manufacturing of Haynes 282
Michael Härtel
- Author in Hochfest und korrosionsbeständig mittels AM – Neue Aluminiumwerkstoffe für den industriellen 3D-Druck, ein Beitrag zur ressourceneffizienten Fertigung
William Hearn Chalmers University of Technology
- Co-author in LB-PBF processing limits for Cr-Mn-Mo low alloy structural steels
Olivier Hercher
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Andreas Hinterer
- Co-author in Integration of electrical conductors into metallic structures by DED technologies
Anders Hjermitslev Teknologisk Institut
- Author in Creating Competitive Metal AM Production with High Volume and Flexibility Based on Digital Twins
Kostiantyn Hlusko
- Co-author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Josef Hodek
- Co-author in Mechanical properties of Additively manufactured builds from maraging steel
Peter Hofer-Hauser
- Co-author in Thermomechanical and thermochemical endurance of hot work tool steels and PVD-coatings for high pressure die casting
Harald Holzgruber
- Co-author in A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook
Amir Horr
- Author in On Fatigue Analyses of Additive Manufacturing Parts: Review of Hybrid Techniques
Eduard Hryha Chalmers University of Technology/Centre for Additive Manufacturing - Metal (CAM2)
- Co-author in LB-PBF processing limits for Cr-Mn-Mo low alloy structural steels
Christopher Hulme-Smith
- Author in Further development and deployment of powder spreadability testing
Aziz Huskic
- Co-author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
- Co-author in Investigation of microstructure and cracking prevention of M4 HSS processed by selective laser melting
Steffen Ihlenfeldt
- Co-author in Topology optimized unit cells for laser powder bed fusion
Eric Aimé Jägle
- Co-author in Development of Al-Ni based alloys for Laser Powder Bed Fusion
Henk Jansen
- Co-author in Serial production of additive manufacturing orthopedic implants using SLM and EBM.
Meuthen John
- Co-author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Jozef Keckes
- Co-author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Michael Kitzmantel
- Co-author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Stéphanie Kodjikian
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Patrick Köhnen
- Author in Computational design of high γ′ nickel-based superalloys for laser powder bed fusion
Martina Koukolikova COMTES FHT
- Co-author in Characterization of local fracture properties of DED deposited multiple material components
Pavel Krakhmalev
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Arthur Kretzer
- Author in Residual stress heterogeneity induced by SLM of carburizing steel 20MnCr5 and its influence on contact fatigue
Robert Krisper
- Co-author in Correlative microstructure investigations of additive manufactured parts
Thomas Laag
- Author in Improvement of part accuracy by combination of pulsed wave (pw) and continuous wave (cw) Laser Powder Bed Fusion
AYOUB LADACI
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Martin Laher
- Co-author in Investigation of microstructure and cracking prevention of M4 HSS processed by selective laser melting
Harald Leitner
- Co-author in Crack Mechanism Analysis of a Laser Powder Bed Fused Carbon-Free FeCoMo Alloy
Louis Lemarquis
- Author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Stefan Leuders
- Author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
Xiaozhou Liao
- Co-author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Fernando Lomello
- Co-author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Samuel Lorin Frauenhofer Chalmers Centre
- Author in Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
Michael Lutze
- Co-author in Hochfest und korrosionsbeständig mittels AM – Neue Aluminiumwerkstoffe für den industriellen 3D-Druck, ein Beitrag zur ressourceneffizienten Fertigung
Tobias Maiwald-Immer
- Co-author in Hochfest und korrosionsbeständig mittels AM – Neue Aluminiumwerkstoffe für den industriellen 3D-Druck, ein Beitrag zur ressourceneffizienten Fertigung
Casteels Marijn
- Co-author in Maximum overhang on WAAM parts without part manipulation and the effect on path planning
Jose Mascheroni
- Author in Residual stress heterogeneity induced by SLM of carburizing steel 20MnCr5 and its influence on contact fatigue
Hicham Maskrot
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
- Co-author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Graham Matheson
- Co-author in Cracking behavior of a Zr-blended aluminum 7075 alloy processed by laser-based powder bed fusion under argon and nitrogen and various argon-nitrogen mixtures
Mustafa Megahed
- Co-author in Computational design of high γ′ nickel-based superalloys for laser powder bed fusion
Bakir Mehic University of Applied Sciences Upper Austria
- Author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
Martina Meisnar Materials & Processes Engineer, European Space Agency
- Author in Past and future challenges for Additive Manufacturing in Space Industry
Pelle Mellin
- Co-author in Further development and deployment of powder spreadability testing
Daniel Melzer COMTES FHT
- Co-author in Characterization of local fracture properties of DED deposited multiple material components
Nikolaus Milaev
- Co-author in Topology optimized unit cells for laser powder bed fusion
Jeroen Mingneau
- Co-author in Maximum overhang on WAAM parts without part manipulation and the effect on path planning
Stefan Mitsche
- Co-author in Correlative microstructure investigations of additive manufactured parts
Gerald Mitteramskogler
- Author in Lithography-based additive manufacturing of functional metal components
Marco Mitterlehner TU Wien
- Author in Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester
Alberto Molinari University of Trento
- Co-author in Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Steven Moseley
- Co-author in Solvent on Granules 3D-Printing of WC-12Co Cemented Carbide Parts
Maxwell Moyle
- Author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Marcel Wolfgang Mueller
- Author in Investigation of microstructure and cracking prevention of M4 HSS processed by selective laser melting
B S Murty
- Co-author in Simulation of microstructural evolution during additive manufacturing of Haynes 282
Venkata Karthik Nadimpalli Technical University of Denmark
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Anton Nalivaiko
- Co-author in Study on the selective laser melting of aluminum matrix composites reinforced with AlN particles
Erich Neubauer
- Author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Wouter Nuyts
- Author in Maximum overhang on WAAM parts without part manipulation and the effect on path planning
Olli Nyrhilae
- Co-author in Energy efficient production of spherical powders for DMLS Applications
Niall O'Dowd
- Author in Exploring the Detection Limits of Powder Bed Defects Using a Structured Light Monitoring System For Powder Bed Fusion Additive Manufacturing
Miloslav Ognianov
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
David Ohlsson RISE
- Author in Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
Christos Oikonomou
- Author in Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Dmityrii Ozherelkov
- Co-author in Study on the selective laser melting of aluminum matrix composites reinforced with AlN particles
Laurent Pambaguian Materials & Processes Engineer, European Space Agency
- Author in Past and future challenges for Additive Manufacturing in Space Industry
Bernd Panzirsch
- Co-author in Correlative microstructure investigations of additive manufactured parts
David Bue Pedersen Technical University of Denmark
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Gandham Phanikumar
- Co-author in ICME-based approach to correlate residual stress generation with micro-structural evolution and solidification cracking during laser powder bed fusion process
- Co-author in Simulation of microstructural evolution during additive manufacturing of Haynes 282
Jan Platl
- Author in Crack Mechanism Analysis of a Laser Powder Bed Fused Carbon-Free FeCoMo Alloy
Laurenz Plöchl
- Author in Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V
QUENTIN POUILLE
- Author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Sophie Primig
- Co-author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Yi Qin
- Author in Process modelling and realization for laser-metal powder additive manufacturing
Daniel Rainer
- Co-author in Crack Mechanism Analysis of a Laser Powder Bed Fused Carbon-Free FeCoMo Alloy
Ronnie Rego Instituto Tecnológico de Aeronáutica
- Author in Residual stress heterogeneity induced by SLM of carburizing steel 20MnCr5 and its influence on contact fatigue
Andreas Reimer AFRC, NMIS
- Author in Process modelling and realization for laser-metal powder additive manufacturing
Florian Resch
- Co-author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Simon Ringer
- Co-author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Sophie Rivoirard
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Lucas Robatto Instituto Tecnológico de Aeronáutica
- Author in Residual stress heterogeneity induced by SLM of carburizing steel 20MnCr5 and its influence on contact fatigue
Mikel Rodriguez-Arbaizar
- Co-author in Solvent on Granules 3D-Printing of WC-12Co Cemented Carbide Parts
Moritz Roscher
- Author in Development of Al-Ni based alloys for Laser Powder Bed Fusion
Jasmin Saewe Fraunhofer Institut für Lasertechnik
- Author in Processing elemental powder blends with miniaturized process chamber designed for material development with laser powder bed fusion
Guilherme Santos Instituto Tecnológico de Aeronáutica
- Author in Residual stress heterogeneity induced by SLM of carburizing steel 20MnCr5 and its influence on contact fatigue
Norbert Schell
- Co-author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Alexander Scheriau
- Co-author in A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook
Johannes Henrich Schleifenbaum
- Co-author in Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stresses of IN718 Thin-Walled Structures
- Co-author in Zinc-Magnesium Alloys for Bioresorbable Medical Implants manufactured by Laser Powder Bed Fusion
Johannes Henrich Schleifenbaum
- Co-author in Investigation of Cooling Rate and Microstructure with the Aim of Alloy Development using Extreme High Speed Laser Material Deposition (EHLA) exemplified by 316L
Martin Schnall
- Co-author in Integration of electrical conductors into metallic structures by DED technologies
Ronald Schnitzer
- Co-author in Crack Mechanism Analysis of a Laser Powder Bed Fused Carbon-Free FeCoMo Alloy
Hartmuth Schröttner
- Co-author in Correlative microstructure investigations of additive manufactured parts
Frédéric Schuster
- Co-author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
Uday Singh
- Author in ICME-based approach to correlate residual stress generation with micro-structural evolution and solidification cracking during laser powder bed fusion process
Marcel Somers Technical University of Denmark
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Christof Sommitsch
- Co-author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
- Co-author in Investigation of microstructure and cracking prevention of M4 HSS processed by selective laser melting
Sebastian Spalt
- Co-author in Integration of electrical conductors into metallic structures by DED technologies
Wolfgang Sprengel
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Robert Steinlechner
- Author in LB-PBF processing limits for Cr-Mn-Mo low alloy structural steels
Sabin Sulzer
- Co-author in Solvent on Granules 3D-Printing of WC-12Co Cemented Carbide Parts
Zhongji Sun
- Author in Residual stress quantification for additively manufactured aluminium samples via laser-powder bed fusion
Jelle ten Kate
- Author in Serial production of additive manufacturing orthopedic implants using SLM and EBM.
Juliane Thielsch
- Co-author in Topology optimized unit cells for laser powder bed fusion
Yankang Tian University of Strathclyde
- Author in Process modelling and realization for laser-metal powder additive manufacturing
Michael Todd
- Co-author in Exploring the Detection Limits of Powder Bed Defects Using a Structured Light Monitoring System For Powder Bed Fusion Additive Manufacturing
Christoph Turk
- Co-author in Crack Mechanism Analysis of a Laser Powder Bed Fused Carbon-Free FeCoMo Alloy
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
Markus Uhlirsch
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Markus Unterrainer MARK Metallwarenfabrik GmbH
- Co-author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
Emilie H. Valente Technical University of Denmark
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Jaroslav Vavrik COMTES FHT
- Co-author in Characterization of local fracture properties of DED deposited multiple material components
Jaroslav Vavřík
- Author in Mechanical properties of Additively manufactured builds from maraging steel
A.M. Villardel
- Co-author in Correlative microstructure investigations of additive manufactured parts
Frederik Vogeler
- Co-author in Maximum overhang on WAAM parts without part manipulation and the effect on path planning
Maximilian Voshage
- Author in Zinc-Magnesium Alloys for Bioresorbable Medical Implants manufactured by Laser Powder Bed Fusion
- Co-author in Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stresses of IN718 Thin-Walled Structures
- Co-author in Investigation of Cooling Rate and Microstructure with the Aim of Alloy Development using Extreme High Speed Laser Material Deposition (EHLA) exemplified by 316L
Adam Wachtor
- Co-author in Exploring the Detection Limits of Powder Bed Defects Using a Structured Light Monitoring System For Powder Bed Fusion Additive Manufacturing
Manuel Walter
- Co-author in Process gas and its influence on additive manufactured AlSi10Mg
Armin Wiedenegger
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
Yannik Wilkens
- Author in Intelligent powder production: Data-driven optimization of productivity
Andreas Wimmer
- Co-author in Cracking behavior of a Zr-blended aluminum 7075 alloy processed by laser-based powder bed fusion under argon and nitrogen and various argon-nitrogen mixtures
Bruno Wolff
- Author in Residual stress heterogeneity induced by SLM of carburizing steel 20MnCr5 and its influence on contact fatigue
Liang Wu
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
Michael F. Zaeh
- Co-author in Cracking behavior of a Zr-blended aluminum 7075 alloy processed by laser-based powder bed fusion under argon and nitrogen and various argon-nitrogen mixtures
Quanren Zeng National Manufacturing Institute Scotland, University of Strathclyde
- Author in Process modelling and realization for laser-metal powder additive manufacturing