A mechanical interlocking joint between sheet metal and carbon fibre reinforced polymers through punching (in session "ADVANCED/SMART MATERIALS, BIPOLAR PLATES, AND MULTI-MATERIAL CONCEPTS/SOLUTIONS")
A uniform method for the characterization of shear fracture strain for high-strength steel sheets under quasi-static and crash loading (in session "TESTING, TESTBEDS")
Accuracy of stretch flange formability prediction by considering strain gradient for actual car body parts (in session "FORMABILITY")
An artificial neural network approach on crystal plasticity for material modeling in macroscopic simulations (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
An evaluation method for experimental necking detection of automotive sheet metals (in session "FORMABILITY")
An overview of Methods for Simulating Sheet Metal Forming with Elastic Dies (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Analysis of process limits for partial hot stamping with controlled pre-cooling by radiation exchange (in session "COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)")
Application of a neural network for predicting the cutting surface quality of punching processes based on tooling parameters (in session "DIGITAL TRANSFORMATION, DIGITALIZATION, SMART PLANTS, SMART PRESSHOPS")
Artificial intelligence-based springback compensation of EV motor component (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Bendability assessment of advanced high strength steels thanks to artificial neural networks (in session "TESTING, TESTBEDS")
Carburization behavior at elevated temperatures and mechanical properties of a hot stamped complex phase steel (in session "COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)")
Characterization of the mechanical properties of selectively embossed sheet metal materials under multi-axial loads (in session "LIGHTWEIGHT STRUCTURES")
CRASHWORTHINESS EVALUATION OF PRESS HARDENED STEELS WITH DIFFERENT LATH-LIKE MICROSTRUCTURES (in session "FORMABILITY")
Cruciform tension-shear test for sheet metal and application to material modeling of mild steel sheet (in session "TESTING, TESTBEDS")
Deformation Prediction of Titanium Alloy in Incremental Sheet Forming with Anisotropic and Asymmetric Yield Function (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Determination of edge fracture limit strain for AHSS in the ISO-16630 hole expansion test (in session "FORMABILITY")
Development of a new cyclic shear test setup for characterizing thin metallic foils (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Development of a novel in-situ measurement method for thermo-mechanically coupled material characterization of high-strength aluminum alloys (in session "LIGHTWEIGHT STRUCTURES")
Development of geometry variants and forming technology for metal diaphragms to increase the efficiency of diaphragm compressors (in session "COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)")
Development of Rapid Die Cooling Technology to Reduce Cycle Time in Hot Stamping Process (in session "COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)")
Dimensional precision and wear of a new approach for prototype tooling in deep drawing (in session "TOOLS AND DIES")
Displacement based simulation and material calibration based on digital image correlation part I - theory (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Displacement based simulation and material calibration based on digital image correlation part II - application (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Edge fracture of the first and third-generation high-strength steels: DP1000 and QP1000 (in session "FORMABILITY")
Effect of blank size on impact hydroforming of 2195 Al-Li alloy half-tube part with curvature (in session "FORMABILITY")
Effect of pre-strain on the edge formability of high strength steels for chassis applications (in session "FORMABILITY")
Effect of strain mode and blank orientation on waviness and its potential improvement in paint appearance of automotive outer panels (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Effect of the intercritical annealing in the formability and microstructure of a medium Mn steel sheet (in session "FORMABILITY")
Evaluation of anisotropic fracture in AA1050-O sheet using uncoupled ductile fracture models with Hill48 plasticity (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Evaluation of hardening models coupled with shear modified Lemaitre damage model for fracture prediction in incremental sheet forming (in session "FOSSIL-FREE STEEL, SUSTAINABLE MATERIALS, AND MATERIAL FORMING")
Evaluation of hole expansion ratio of ultra-high strength martensitic steels produced with various processing routes (in session "FOSSIL-FREE STEEL, SUSTAINABLE MATERIALS, AND MATERIAL FORMING")
Experimental Characterization and Prediction of Forming Limit Diagrams of PHS1800 During Hot Stamping (in session "FORMABILITY")
EXPERIMENTAL CHARACTERIZATION OF FORMING BEHAVIOR OF 3rd GEN AHSS (in session "TESTING, TESTBEDS")
Experimental investigation of the effect of lubricant change on automotive component (in session "TRIBOLOGY")
Experimental investigation of the effect of W-temper forming process parameters on springback (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Experiments and simulations of the drawing envelope of pure aluminum (in session "FORMABILITY")
Formability evaluation based on a constitutive model with stress rate direction dependency considering bifurcation modes (in session "DIGITAL TRANSFORMATION, DIGITALIZATION, SMART PLANTS, SMART PRESSHOPS")
Formed developables - a new class of sheet metal parts (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Forming of a cylindrical cup in 7075-T6 under warm temperature conditions (in session "FORMABILITY")
Fracture toughness to assess the effect of trimming on the fatigue behaviour of high-strength steels for chassis parts (in session "TESTING, TESTBEDS")
Friction and lubrication modelling in sheet metal forming: Influence of local tool roughness on product quality and process robustness (in session "TRIBOLOGY")
History of Hot Stamping process and hot stamping simulations (in session "PLENARY TALKS")
Hot-forming of a 980 MPa third generation advanced high strength steel (in session "FORMABILITY")
Impact of elastic modulus evolution on springback prediction (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Impact of the process velocities on the quality of free-form bent parts (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Industrial Internet of Things and Big Data Techniques for the Smart Press Shop 4.0 Development in Automotive Industry (in session "DIGITAL TRANSFORMATION, DIGITALIZATION, SMART PLANTS, SMART PRESSHOPS")
Influence of elevated surface temperature on the formability in cold forming of aluminum alloy sheets (in session "FORMABILITY")
Influence of process and material parameters on the twist springback prediction of a panel (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Innovative experimental setup for the investigation of material models with regard to strain hardening behavior (in session "TESTING, TESTBEDS")
Investigation of tool damage in shear cutting of ultra high strength sheet steels (in session "TOOLS AND DIES")
Investigation on evolution of microstructure and mechanical properties of heat-treatable aluminum alloy during hot sheet metal forming process (in session "COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)")
Local and global forming potential of present dual-phase steel developments (in session "FORMABILITY")
Material variability effects on automotive part production process (in session "FOSSIL-FREE STEEL, SUSTAINABLE MATERIALS, AND MATERIAL FORMING")
Measurement and prediction methods for forming limit strain of stretch bending deformation in sheet metal forming (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Measurement of skid line formation and formation mechanism of automotive outer panel (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Micro incremental forming of thin SS304 foils and its microstructural study (in session "LIGHTWEIGHT STRUCTURES")
Multi-functional SMC-aluminum battery tray to drive lightweight design (in session "LIGHTWEIGHT STRUCTURES")
Novel and revisited experiments for plasticity and fracture testing of sheet metals (in session "PLENARY TALKS")
Novel tool steels for application in hot stamping (in session "TOOLS AND DIES")
Numerical analysis of the load paths and the resulting damage evolution during the deep drawing of dual-phase steel (in session "COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)")
Numerical and experimental investigation of hole flangeability of AA6061 alloy (in session "FORMABILITY")
Numerical modelling of shear cutting using particle methods (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
On-line quality control and tool wear evaluation in trimming process by data analytics technics (in session "DIGITAL TRANSFORMATION, DIGITALIZATION, SMART PLANTS, SMART PRESSHOPS")
Optimal milling data preparation for draw dies (in session "PLENARY TALKS")
Optimised parametrisation of the MMC failure model using acoustic emission and FE analysis (in session "TESTING, TESTBEDS")
Optimization of the physical scaling approach through adaption of the inverted membrane stresses (in session "TOOLS AND DIES")
Optimization of wear-, fracture- and corrosion performance of Vanadis 6 steel through cryogenic treatment and tempering (in session "TOOLS AND DIES")
Oxygen-free resistance heating with nitrogen and silane as an energy-efficient heating process for hot stamping (in session "COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)")
Part quality improvement in flexible roll forming of a combined variable width and depth component (in session "COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)")
Partial resistance tempering of hot-stamped components for subsequent bending (in session "FOSSIL-FREE STEEL, SUSTAINABLE MATERIALS, AND MATERIAL FORMING")
Performance of stringer sheet parts under static and dynamic load (in session "LIGHTWEIGHT STRUCTURES")
Perspectives on AI applications in sheet metal forming (in session "PLENARY TALKS")
Prediction of texture-induced plastic anisotropy in AA6014-T4 aluminium sheets utilising two different crystal plasticity constitutive models (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Prediction strategy for forming and joining process of oval tubes (in session "TOOLS AND DIES")
Press hardening - History, and future (in session "PLENARY TALKS")
Pressure distributions in deep drawing with a passive cardanic blank holder (in session "TOOLS AND DIES")
Process chain for forming and consolidating fiber-reinforced thermoplastics and metallic sheets in a two-stage isothermal tool (in session "ADVANCED/SMART MATERIALS, BIPOLAR PLATES, AND MULTI-MATERIAL CONCEPTS/SOLUTIONS")
Process Monitoring using Digital Twin-Based Sensors integrated in Tool Clamping Surface (in session "DIGITAL TRANSFORMATION, DIGITALIZATION, SMART PLANTS, SMART PRESSHOPS")
Process optimization and robustness analysis for HFQ process using AutoForm-Sigma (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Proposal of a new tool for pre-straining operations of sheet metals (in session "TOOLS AND DIES")
Research on the evolving yielding behavior and micro-mechanism in biaxial deformation of DP1180 sheet based on crystal plasticity finite element model (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Sheet metal forming simulations at Volvo Cars: the past, the present and the future (in session "PLENARY TALKS")
Simulation of deep drawing of dual phase steel sheets incorporating tribological behaviour predicted by advanced friction modelling (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
SSAB’s transformation to Fossil Free Steel with the HYBRIT Technology (in session "PLENARY TALKS")
Strain evolution during hole expansion testing of 800 MPa tensile strength hot-rolled steels (in session "FORMABILITY")
Strength enhancement and uniform grain refinement through cross route-constrained groove pressing (in session "FOSSIL-FREE STEEL, SUSTAINABLE MATERIALS, AND MATERIAL FORMING")
Study of Microstructural Evolution of Press Hardening Steels using Dilatometer and In-situ Studies for a Simulated Hot Stamping Condition (in session "COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)")
Study of the Influence of part features of AHSS A-pillar on springback and its robustness (in session "SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY")
Substitutive models of press deflections for efficient numerical die cambering (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
The effect of scrap originating trace elements on the properties of low-alloyed steels’ (in session "FOSSIL-FREE STEEL, SUSTAINABLE MATERIALS, AND MATERIAL FORMING")
The Investigations on Formability of Tantalum RO5200 Thin Foils: Bio-Material (in session "FORMABILITY")
Three Industrial Cases of Sheet Metal Forming Simulations with Elastic Dies (in session "SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)")
Towards Virtual Tryout and Digital Twins at Volvo Cars (in session "PLENARY TALKS")
Wear characteristics of the tool in the cold stamping process of ultra high strength steel sheet by establishing a novel wear test method based on the progressive die (in session "TOOLS AND DIES")
Yield Locus Development and Microstructure Characterization of AA2219 under Planar Biaxial Loading (in session "FORMABILITY")
Include materials from selected contributions
