12th International Conference on Zinc & Zinc Alloy Coated Steel Sheet - GALVATECH 2021

Name: 12th International Conference on Zinc & Zinc Alloy Coated Steel Sheet - GALVATECH 2021
Start: 2021-06-20T08:00:00+02:00
End: 2021-06-24T18:00:00+02:00
Location: Virtuel Conference

21-23 June 2021 Virtual Conference

Virtuel Conference

Europe/Vienna timezone

Thank you very much for your participation!

Support

Speaker List

Soroush Aghaeian
- Speaker at KINETICS OF WÜSTITE FORMATION IN SHORT TIME ON PURE IRON IN THE GAS MIXTURE OF CO2+CO OR H2O+H2
Masoud Ahmadi
- Speaker at MECHANICAL PROPERTIES AND CRACKING BEHAVIOR OF HOT-DIP GALVANIZED ZnAlMg COATINGS
Eric Almquist
- Speaker at PRODUCER EXPERIENCES AND ADVANCEMENTS WITH AN ONLINE, NON-CONTACT SURFACE CLEANLINESS MONITOR
Thomas Antretter
- Speaker at SCANNING ELECTRON MICROSCOPE INVESTIGATION ON ZINC INDUCED CRACKS OF COATED PRESS HARDENED COMPONENTS
Andreas Argårds SSAB
- Speaker at NEWEST GENERATION OF METRIS ADVANCED FURNACE CONTROL FULFILS HIGHEST QUALITY DEMANDS
Selim Arikan Smart Steel Technologies
- Speaker at INSPECTING SURFACE QUALITY OF GALVANIZED STEEL BY DEEP LEARNING
Martin Arndt
- Speaker at NANOSCALE INVESTIGATION OF GRAIN BOUNDARY WETTING AND MICRO CRACKS OF PRESS HARDENED GALVANIZED 20MnB8 STEEL
Carlos Arroyave
- Speaker at CATASTROPHIC BEHAVIOR OF GALVANIZED STEEL EXPLAINED BY FUNDAMENTALS OF CORROSION SCIENCE
Rohit Bardapurkar
- Speaker at RAPID DESIGN OF NEW Zn-Mg-Al-Sn COATINGS WITH LOW MELTING POINT FOR AUTOMOTIVE SHEET APPLICATIONS VIA MACHINE LEARNING
Kevin Bertermann
- Speaker at CELES ECOTRANSFLUX™, A DISRUPTIVE TECHNOLOGY FOR HEATING GEN3 AHSS
Kazi Mahmudul Haque Bhadhon
- Speaker at EFFECT OF PROCESS ATMOSPHERE DEW POINT AND MINOR Sn ADDITION ON THE SELECTIVE OXIDATION DURING INTERCRITICAL ANNEALING OF A MEDIUM-Mn THIRD GENERATION ADVANCED HIGH STRENGTH STEEL
Diptak Bhattacharya
- Speaker at QUANTITATIVE ASSESSMENT OF THE INFLUENCE OF STARTING MICROSTRUCTURE ON THE LIQUID METAL EMBRITTLEMENT SUSCEPTIBILITY OF 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
Frances Bleich
- Speaker at CHALLENGINGS IN GALVANNEALING AHSS AT AN INDUSTRIAL HOT DIP GALVANIZING LINE
Christoph Böhne Universität Paderborn
- Speaker at APPLICATION-ORIENTED AVOIDANCE OF LIQUID METAL EMBRITTLEMENT DURING RESISTANCE SPOT WELDING OF ZINC-COATED ADVANCED HIGH STRENGHT STEELS
Louis Bordignon
- Speaker at GALVANIZING OF TRIP-Si STEELS
Sergey Bragin
- Speaker at THROUGH-PROCESS OPTIMIZATION (TPO) - A MODERN APPROACH TO RAPID PRODUCT DEVELOPMENT
Mark Bright
- Speaker at THE MODIFICATION PROCESS OF THE DROSS BUILD-UP STRUCTURE ON SUBMERGED HARDWARE IN Zn-Al AND Zn-Al-Mg BATHS
Fritz Brühl
- Speaker at HOT-DIP GALVANIZING LINES - CHALLENGES AND SOLUTIONS FOR THE INDUSTRIAL PRODUCTION OF COATED 3rd GEN AUTOMOTIVE STEELS
Houssem Eddine Chaieb
- Speaker at MICROSTRUCTURE AND TEXTURE ANALYSIS OF A NEAR-EUTECTIC Zn-Al COATING DEPOSITED ON STEEL BY HOT-DIP GALVANIZING
Anirban Chakraborty
- Speaker at EFFECT OF STEEL SUB-SURFACE STRUCTURE ON MECHANICAL PROPERTIES OF GALVANIZED 3rd GENERATION ADVANCED HIGH STRENGTH STEELS
- Speaker at EVALUATION OF INITIATION AND PROPAGATION OF LME CRACKS ON THE GALVANIZED 3G-AHSS USING INTERRUPTED RESISTANCE SPOT-WELDING METHOD
Daniel CHALEIX
- Speaker at JET VAPOUR DEPOSITION: A TECHNICAL ECONOMIC ALTERNATIVE TO ELECTRO-GALVANIZING FOR Zn COATINGS OF FUTURE STEELS
Chris Childs
- Speaker at Next Generation EDT Technology
Jung-Wook Cho
- Speaker at ENHANCEMENT OF HOT DIP GALVANIZING ON AS-CAST HIGH-Mn STEEL BY FABRICATION OF FUNCTIONALLY GRADED MULTILAYERS THROUGH LASER CLADDING OF LOW CARBON STEEL
Lei Cui
- Speaker at INVESTIGATION OF ORANGE PEEL DEFECT ON GALVANIZED DP STEEL SHEET
Walter DAL'MAZ SILVA
- Speaker at AN INTEGRATED METHODOLOGY FOR THE ROOT CAUSE ANALYSIS OF MECHANICAL AND METALLURGICAL DEFECTS OF HOT-DIP GALVANIZED COATINGS
Thomas Daube SMS group Gmbh
- Speaker at HOT-DIP GALVANIZING LINES - CHALLENGES AND SOLUTIONS FOR THE INDUSTRIAL PRODUCTION OF COATED 3rd GEN AUTOMOTIVE STEELS
Marc Debeaux
- Speaker at INFLUENCE OF ELECTROLYTE COMPOSITION AND TEMPERATURE ON ENERGY DEMAND AND ZINC STRUCTURE DURING ELECTRO-GALVANIZING
Ann De Boeck ArcelorMittal Europe
- Speaker at ArcelorMittal GENT PRODUCES 3rd GEN. AHSS INCL. Q&P ON THE UNIQUE ANNEALING FURNACE FROM ANDRITZ
Matthieu DIDIER
- Speaker at HDG POT PRODUCTIVITY
MICHEL DUBOIS
- Speaker at POT ROLL GEOMETRY AND CROSSBOW CORRECTION
- Speaker at PRODUCTION OF HEAVY COATING AT LOW SPEED
- Speaker at EXPERIMENTAL AND NUMERICAL STUDY OF GAS JET COOLING AT HIGH REYNOLDS NUMBER
michel DUBOIS
- Speaker at A SIMPLE MODEL TO ESTIMATE AND TRACK THE WEAR RATE OF POT BEARINGS
Henrique Eleuterio
- Speaker at INFLUENCE OF Al CONTENT IN THE ZN BATH ON GALVANIZED COATING FORMATION OF HIGH STRENGTH STEELS
Can Ergun Primetals Technologies Austria GmbH
- Speaker at THROUGH-PROCESS QUALITY CONTROL (TPQC) SYSTEM - ANY DATA, ANY TIME
Werner Eßl
- Speaker at CFD-DPM MODELLING AND ANALYSIS OF DROSS PARTICLE DYNAMICS IN HOT-DIP GALVANIZING BATHS
Josef Faderl
- Speaker at AVOIDING ZINC INDUCED CRACKING IN HOT FORMING
Rhys Faulkner
- Speaker at OFFLINE SIMULATION OF GALVANISING BATH JOURNAL BEARINGS AS A COST EFFECTIVE SOLUTION TO IMPROVE LINE PERFORMANCE AND MITIGATE RISK
Martin Fein
- Speaker at NEWEST GENERATION OF METRIS ADVANCED FURNACE CONTROL FULFILS HIGHEST QUALITY DEMANDS
Alessandro Ferraiuolo
- Speaker at NEW APPROACH FOR ONLINE AUSTENITE FRACTION MEASUREMENT FORMED DURING CONTINUOUS ANNEALING PROCESS. PART I: MEASURE ON HIGH STRENGTH MICROALLOYED STEEL GRADES
Yvon Fontaine
- Speaker at SIAS® 4.0 - THE NEXT GENERATION OF AUTOMATIC SURFACE INSPECTION SYSTEM USING CONVOLUTIONAL NEURON NETWORK FOR DETECTION AND CLASSIFICATION OF SURFACE DEFECTS
Nobuhiro Fujita Nippon Steel
- Speaker at RECENT DEVELOPMENTS AND OUTLOOK ON ZINC AND ZINC ALLOY COATED STEEL SHEETS IN JAPAN
Wolfgang Gaderbauer
- Speaker at NANOSCALE STRUCTURE AND COMPOSITIONAL ANALYSIS OF SURFACE OXIDES ON HOT-DIP GALVANIZED PRESS-HARDENED STEEL
Neil Gao
- Speaker at CORROSION EVALUATION OF THIN Zn-Al ALLOY COATINGS IN A SEVERE MARINE ENVIRONMENT
- Speaker at DEVELOPMENT OF A Zn-Al-Mn-Sb ALLOY COATING FOR PRESS HARDENABLE STEELS
Johann Gerdenitsch
- Speaker at IMPACT OF SURFACE TOPOGRAPHY OF ELECTRO GALVANIZED STEEL SHEET ON PAINT APPEARANCE
Marie-Laurence Giorgi
- Speaker at IMPROVEMENT OF WETTABILITY BETWEEN STEEL AND LIQUID Zn-Al ALLOY BY FORCED WETTING
Frank Goodwin
- Speaker at NORTH AMERICAN DEVELOPMENTS AND OPPORTUNITIES FOR GALVANIZED STEEL SHEET
Srinivasulu Grandhi
- Speaker at STUDY OF MANGANESE ADDITION ON THE CORROSION RESISTANCE OF GALVANIZED ZINC COATING
Hugues Guerault
- Speaker at FAST AND NON-DESTRUCTIVE METHOD FOR PHASE QUANTIFICATION IN ZINC ALLOYED COATED STEEL SHEET
Martin Hamman ANDRITZ
- Speaker at ArcelorMittal GENT PRODUCES 3rd GEN. AHSS INCL. Q&P ON THE UNIQUE ANNEALING FURNACE FROM ANDRITZ
Kentaro Hata
- Speaker at RELATIONSHIP BETWEEN HYDROGEN ABSORPTION AND CORROSION BEHAVIOR OF ELECTROGALVANIZED STEEL SHEETS IN DRY-WET CORROSION ENVIRONMENT
olivier herbiet
- Speaker at IN-LINE CHARACTERISATION OF THE AUSTENITE LEVEL TO ENSURE THE MECHANICAL PROPERTIES ALONG THE COIL
Seok-Hyun Hong
- Speaker at THE EFFECT OF Si ADDITION ON Zn-ASSISTED LIQUID METAL EMBRITTLEMENT IN 22MnB5 PRESS HARDENING STEEL
Moon Hi Hong
- Speaker at NEW INDUSTRIAL ACRYLIC RESIN COIL-COATING BOTH ON MECHANICALLY PATTERNED GI AND STS SHEETS
Sven Erik Hörnström
- Speaker at CHARACTERIZATION OF RESIDUAL STRESSES AT SHEARED, MILLED AND LASER CUT EDGES IN MARTENSITIC STEELS
Katsuya Hoshino
- Speaker at SEGREGATION MECHANISM OF Al-BASED OXIDES ON Zn-0.2MASS%Al HOT-DIP GALVANIZED STEEL SHEETS
Joo-Youl Huh
- Speaker at DENDRITIC MORPHOLOGIES OF HOT-DIP GALVANIZED Zn-0.2 WT.% Al COATINGS: EXISTENCE OF THIRD PREFERRED GROWTH DIRECTIONS
Richard Johansson VOLVO CAR CORPORATION
- Speaker at Current use and future outlook of coated sheet steel at Volvo Cars
Taihei Kaneto
- Speaker at DEVELOPMENT OF ADVANCED PRE-PAINTED Zn-11%Al-3Mg-0.2%Si COATED STEEL SHEETS
Sho Katsura
- Speaker at INVESTIGATION OF "BUILD-UP" GROWTH BEHAVIOUR ON HEARTH ROLLS OF CONTINUOUS GALVANIZING LINE
Tae Chul Kim
- Speaker at INVESTIGATION OF HOT-DIP ZnMgAl COATINGS FOR AUTOMOTIVE APPLICATIONS
Jong_Sang Kim POSCO
- Speaker at RECENT PROGRESS OF ZINC AN ZINC ALLOY COATED STEEL SHEETS IN KOREA
HEUNG YUN KIM
- Speaker at NEW ZnAlMg ALLOY COATINGS WITH ULTRA HIGH CORROSION RESISTANCE
Doyub Kim
- Speaker at EFFECT OF Zn-COATING PROCESS ON LIQUID METAL EMBRITTLEMENT OF TRIP STEEL
Tobias Klinkberg
- Speaker at SIMULATION AND OPTIMISATION OF A WIPING KNIFE ON THE LAB SCALE
Thomas Koll
- Speaker at EUROPE: TOMORROW JUST AROUND THE CORNER?
Takeshi Konishi
- Speaker at STRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF TOP DROSS IN A MOLTEN ZINC BATH
Masumi Koori
- Speaker at THE EFFECT OF BONDING STATE BETWEEN THE GALVANIZED STEEL SHEETS AND THE ADHESIVE ON DETERIORATION BEHAVIOR OF ADHESIVE JOINT
Nils Köpper
- Speaker at ON GRAIN BOUNDARY TOPOGRAPHY AND SURFACE REACTIVITY DURING HOT-DIP GALVANISING
Horst Krauthäuser
- Speaker at ONLINE PHASE FRACTION MEASUREMENT IN A CONTINUOUS ANNEALING FURNACE WITH X-CAP® TECHNOLOGY
Venu Krishnardula
- Speaker at AHSS SURFACE OXIDE PHASE FORMATION DURING ANNEALING AND PREDICTING THEIR TYPE USING GIBBS ENERGY MINIMIZATION (GEM) THERMODYNAMIC PRINCIPLE
Lutz Kümmel SMS group Gmbh
- Speaker at HOT-DIP GALVANIZING LINES - CHALLENGES AND SOLUTIONS FOR THE INDUSTRIAL PRODUCTION OF COATED 3rd GEN AUTOMOTIVE STEELS
JoungHyun La
- Speaker at EFFECT OF ANNEALING ATMOSPHERE ON HYDROGEN EMBRITTLEMENT OF ADVANCE HIGH STRENTH STEEL
Carsten Lachmann Volkswagen Aktiengesellschaft
- Speaker at STRESS CORROSION CRACKING OF HOT FORMING STEELS
Nathalie LeBozec
- Speaker at THE EFFECT OF MICROSTRUCTURE ON THE CORROSION STABILITY OF ZINC ALUMINIUM MAGNESIUM ALLOYED COATED STEEL IN ATMOSPHERIC CONDITIONS
JONG BEOM LEE
- Speaker at AN OPTIMIZATION OF SPANGLE MINIMIZER FOR Al-Si COATED STEEL SPANGLE CONTROL
Suk Kyu Lee
- Speaker at DEVELOPMENT OF NEW Al COATED STEEL WITHOUT LME CRACKS AND EXCELLENT CORROSION
Alexandre LHOEST
- Speaker at MULTILAYER ANGULAR ROLL MODEL FOR ONLINE CONTINUOUS CONTROL OF GALVANIZING LINES DRIVEN BY FURNACE MATHEMATICAL MODEL
Kaihsiang Lin
- Speaker at EFFECT OF ANNEALING ATMOSPHERE AND STEEL ALLOY COMPONENTS ON SURFACE TOPOGRAPHY AND RADIATIVE PROPERTIES OF ADVANCED HIGH STRENGTH STEEL STRIP DURING CONTINUOUS GALVANIZING
Daniel Liu
- Speaker at AHSS SURFACE OXIDE PHASE FORMATION DURING ANNEALING AND PREDICTING THEIR TYPE USING GIBBS ENERGY MINIMIZATION (GEM) THERMODYNAMIC PRINCIPLE
Mario Lovric
- Speaker at PREDICTION OF ANODE LIFE TIME IN ELECTRO GALVANIZING LINES BY BIG DATA ANALYSIS
Hans-Bodo Lüngen
- Speaker at WAYS TO REDUCE CO2 EMISSIONS IN IRON AND STEELMAKING IN EUROPE
Friedrich Luther
- Speaker at ON THE REDUCTION OF TEMPERATURE GRADIENTS WITHIN AlSi-COATED BLANKS WITH NON-CONSTANT SHEET THICKNESS FOR HOT PRESS FORMING APPLICATION
Tiago Machado
- Speaker at NEW COATING FOR PRESS HARDENED STEELS: AlSiZnMg
Friedhelm Macherey
- Speaker at THE ROLE OF STEEL SHEET AND ITS IMPACT ON AN OUTSTANDING QUALITY PAINT USED FOR AUTOMOTIVE OUTER SKIN
Roel Mallens
- Speaker at SELECTIVE OXIDATION IN A BAKE HARDENING STEEL FOR DFF - RTF ANNEALING CYCLES
Mélodie MANDY
- Speaker at INFLUENCE OF Zn-BASED COATING ALLOYS ON HYDROGEN DIFFUSION AND CORROSION RESISTANCE IN A DP STEEL
Jean-Michel Mataigne
- Speaker at COMPARATIVE ASSESSMENT OF GI AND GA COATED AHSS LME SENSITIVITY DURING SPOT WELDING
Matthew McCosby
- Speaker at U. S. STEEL XG3 – 3rd GENERATION STEEL: CUSTOMER-FRIENDLY CHEMISTRY, PROPERTIES, AND MANUFACTURABILITY ENABLED BY UNIQUE PROCESSING
Joseph McDermid
- Speaker at A NOVEL MULTI-SLOT AIR-KNIFE DESIGN FOR LIGHTER MORE CONSISTENT COATING WEIGHTS IN THE GAS JET WIPING PROCESS
- Speaker at ON THE ORIGIN OF MICRO-CRACKING IN ZINC COATED PRESS HARDENED STEELS
Takuya Mitsunobu
- Speaker at PERITECTIC STRUCTURE EVOLUTION IN HOT-DIP Zn-Al ALLOY COATINGS
Maxime Monnoyer
- Speaker at FIVES’ EYERON™, ALL-IN-ONE QUALITY MANAGEMENT SOFTWARE
Alexandre Nadeau
- Speaker at IN-LINE BATH CHEMISTRY MONITORING: REVOLUTIONARY RELIABILITY OF THE NEW DIODE-BASED LASER INDUSTRIAL LIBS SENSOR
- Speaker at IN-LINE SEAM WELD INSPECTION USING LASER-ULTRASONICS: RESULTS FROM AN INDUSTRIAL TRIAL
Martin Niederer
- Speaker at NONLINEAR MODEL PREDICTIVE TEMPERATURE CONTROL OF A COMBINED DIRECT- AND INDIRECT-FIRED STRIP ANNEALING FURNACE
Franck Nozahic
- Speaker at QUANTITATIVE EVALUATION OF NANOSCALE MECHANICAL PROPERTIES OF Zn-Al AND Zn-Al-Mg COATINGS ON STEEL SHEET BY NANOINDENTATION
Se-Young Oh
- Speaker at Study on Corrosion Resistance and Adhesion of Paint Coated Zn-Al-Mg Galvanized Steel
Takashi OKE
- Speaker at THE BEHAVIOR OF LIQUID ZINC FLOW IN FULL SPLASHING
Masataka Omoda
- Speaker at APPLICATION OF DATA SCIENCE TO ATMOSPHERIC CORROSION PREDICTION
Daniella Pallisco
- Speaker at EFFECT OF CGL-COMPATIBLE HEAT TREATMENTS ON THE SELECTIVE OXIDATION OF A 0.15C-6Mn-2Al-1Si THIRD-GENERATION ADVANCED HIGH STRENGTH STEEL
Bora Park
- Speaker at EFFECT OF Al CONTENT ON THE CORROSION BEHAVIOR IN Mg-Zn-Al ALLOY COATED STEEL SHEET
TAE JUN PARK
- Speaker at INFLUENCE OF SURFACE ROUGHNESS OF FULL HARD STEEL ON SPANGLE OF GALVANIZED STEEL AND ACTUAL APPLICATION RESULTS
Daniel Parker
- Speaker at Zn VAPOUR INDUCED CORROSION OF 253 MA STAINLESS STEEL END PLATE AND FLANGE IN RETRACTABLE SNOUTS
Owen Pearcy
- Speaker at THE EVOLUTION OF COATING CONTROL SYSTEMS AS THE NEED FOR NEW COATED PRODUCTS EXPANDS
Etienne PETIT
- Speaker at MECHANISMS STABILIZING GENERAL VAPOUR-PHASE GALVANIZING
Le Quang Phan
- Speaker at WIPING PRESSURE DYNAMICS AND THEIR EFFECTS ON GALVANIZING COATING SMOOTHNESS
Cyril Plancq
- Speaker at CLEANLINESS MEASUREMENT BY INNOVATIVE LIBS METHOD
Juliana Porto Guimarães
- Speaker at EFFECT OF THE ATMOSPHERE DEW POINT OF CONTINUOUS ANNEALING FURNACES ON THE QUALITY OF GA COATING ON BAKE HARDENING STEEL
Maedeh Pourmajidian
- Speaker at REACTIVE WETTING OF MEDIUM-Mn ADVANCED HIGH-STRENGTH STEELS BY A Zn-Al-Mg BATH
Konstantin Manuel Prabitz
- Speaker at NUMERICAL MODEL FOR PREDICTING LIQUID METAL CRACKING DURING RESISTANCE SPOT WELDING OF ADVANCED HIGH STRENGTH STEELS
Tomas Prosek
- Speaker at IN SITU INVESTIGATION OF HYDROGEN ENTRY AND HYDROGEN EMBRITTLEMENT OF ZINC-COATED HIGH STRENGTH STEELS INDUCED BY ATMOSPHERIC CORROSION
Marina Pushkareva
- Speaker at INFLUENCE OF INTERCRITICAL ANNEALING CYCLES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DP980 ADVANCED HIGH-STRENGTH STEEL
Alexander Reimann
- Speaker at APPLICATION OF A PHYSICS-BASED EMPIRICAL MODEL FOR ESTIMATION OF RADIANT TUBE TEMPERATURES IN A GALVANIZING LINE
Georg Reiss
- Speaker at INFLUENCE OF DROSS BUILD-UP INDUCED ROUGHNESS ON FLOW STRUCTURES AND HEAT-TRANSFER OF SINK ROLLS IN HOT-DIP GALVANIZING LINES
- Speaker at NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS
Markus Ringhofer
- Speaker at SCHEDULING SOLUTIONS SUPPORT SUSTAINABLE PRODUCT QUALITY OF GALVANIZED COILS BY PROVIDING PRODUCTION SCHEDULES IN REPEATABLE QUALITY
Thierry Robin Fivesgroup
- Speaker at HOW MODEL PREDICTIVE CONTROL ENHANCES STRIP TEMPERATURE REGULATION
Michael Rohwerder
- Speaker at SCANNING KELVIN PROBE TECHNIQUES FOR THE INVESTIGATION OF CORROSION, HYDROGEN UPTAKE AND PERMEATION PROPERTIES OF ZINC ALLOY COATINGS ON STEEL
Jennifer Rolls
- Speaker at UNDERSTANDING THE EVOLUTION OF SURFACE OXIDES UPON DUAL PHASE STEELS DURING AN ANNEALING CYCLE
Michael Rupp
- Speaker at AUTOMOTIVE INDUSTRY – QUO VADIS
Nathalie Ruscassier
- Speaker at SELECTIVE OXIDATION OF Fe-Mn (1WT.%) BINARY ALLOY DURING CONTINUOUS ANNEALING
Ryo Sasaki
- Speaker at IN-SITU OBSERVATION OF THE CRYSTALLIZATION AND GROWTH BEHAVIOR OF Fe-Zn INTERMETALLIC COMPOUND ("BOTTOM DROSS") IN THE MOLTEN ZINC USING X-RAY TRANSMISSION IMAGING METHOD
Rinta Sato
- Speaker at ATMOSPHERIC CORROSION BEHAVIOURS OF AUTOMOTIVE STEEL SHEETS EXPOSED IN EAST AND SOUTH-EAST ASIA REGIONS
Ernst Dietmar Schachinger
- Speaker at INFLUENCE OF OXIDE COMPOSITION AND SHOT BLASTING PARAMETERS ON SURFACE RESISTANCE OF GALVANIZED PRESS HARDENED STEELS
Maximilian Schleupen
- Speaker at DEVELOPMENT OF AN ADVANCED ULTRA-FAST COOLING SECTION
Nico Schmitz
- Speaker at INCREASING LIFETIME OF METALLIC RADIANT TUBES IN VERTICAL GALVANIZING LINES
Vaclav Sefl
- Speaker at ELECTROCHEMICAL BEHAVIOR OF Si PHASES IN NOVEL ZnAlMgSi COATINGS
Akihiro Sengoku
- Speaker at THE MECHANICAL PROPERTIES AND CRYSTAL STRUCTURE OF Fe-Zn SOLID-SOLUTION IN HOT-STAMPED GA COATING
Nega Setargew
- Speaker at SPANGLE NUCLEATION AND REFINEMENT THEORY IN 55%Al-Zn COATED STEEL
Ghazal Seyed Mousavi
- Speaker at MITIGATION OF THE ADVERSE EFFECTS OF INCREASING Si CONTENT IN A CMnSi ADVANCED HIGH STRENGTH STEEL VIA CONTROLLING ANNEALING ATMOSPHERE pO2 AND MINOR Sn ADDITION DURING CONTINUOUS GALVANIZING
Pertti Sippola
- Speaker at UNIQUE SIMULTANEOUS RAPID COOLING AND ZINC COATING TECHNOLOGY - NO BAINITE BEFORE ZINC POT
Weiping Sun
- Speaker at DEVELOPMENT OF A Zn-Al-Mn-Sb ALLOY COATING FOR PRESS HARDENABLE STEELS
Yuki Suzuki
- Speaker at THE EFFECT OF PHOSPHORIC ACID ADDED TO CHEMICAL CONVERSION COATING LAYER ON CORROSION PROTECTION IN SCRIBED AREAS OF ZINC-COATED STEELS
Massimiliano Svetina
- Speaker at EFFICIENT AND EFFECTIVE OPERATION OF A HOT DIP GALVANIZING LINE
Naoki Takata
- Speaker at FORMATION SEQUENCE OF Fe-Al INTERMETALLIC PHASES IN HOT-DIP Zn-Al-Mg ALLOY GALVANIZED STEELS
Yuki Takeda
- Speaker at THE PROPOSAL FOR IMPROVEMENT OF INTERSTITIAL FREE STEEL MECHANICAL PROPERTIES IN CGL PROCESS
Gentaro Takeda
- Speaker at EFFECT OF INITIAL VELOCITY DISTRIBUTIONS IN THE TRANSITION REGION IMPINGEMENT OF SLOT-JET
dominique thierry
- Speaker at INFLUENCE OF MINOR ADDITION OF Si AND Ti ON THE CORROSION PERFORMANCE OF ZM COATED STEEL
- Speaker at RECENT ADVANCE IN CORROSION MONITORING OF ATMOSPHERIC CORROSION OF GALVANISED STEEL AND ZINC ALLOYED COATED STEEL
Chris Thomsen
- Speaker at DEVELOPMENT OF NEW GRADES OF Zn-COATED PRESS-HARDENABLE STEEL COMPATIBLE WITH THE CONTINUOUS GALVANIZING LINE
kunihiko toshin
- Speaker at DEVELOPMENT OF ONE LAYER PRE-PAINTED STEEL SHEET
Ines Traxler
- Speaker at INVESTIGATIONS ON CORROSION BEHAVIOR AND HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF GALVANIZED DUAL-PHASE STEEL
Kazuaki Tsuchimoto
- Speaker at EFFECT OF THIOGLYCOLIC ACID ON THE MORPHOLOGY OF Zn ELECTRODEPOSITED ON STEEL SHEETS
Harald Unger
- Speaker at FLOW PATTERN ANALYSIS INSIDE AN IMMERSING SNOUT WITH A PARAMETIC SIMULATION MODEL
Remi Valentin
- Speaker at WIPING PILOT USE FOR BAFFLE DESIGNS AND SETUP IMPROVEMENTS
Jaap van Eenennaam
- Speaker at EASY ANALYSIS OF AIR KNIFE PERFORMANCE BY STATIONARY FLOW CALCULATIONS
Bart van Veldhuizen
- Speaker at AN INNOVATIVE GI WITH IMPROVED GALLING AND SURFACE PROPERTIES FOR EXPOSED AUTOMOTIVE APPLICATIONS
Philippe Verpoort
- Speaker at ZnAlMg METALLIC COATINGS IN HARSH ENVIRONMENTS: A COMPARATIVE AND CHALLENGING STUDY
Shunsuke Yamamoto
- Speaker at ANALYSIS OF COSMETIC CORROSION BEHAVIOR BY IN-SITU OBSERVATION IN WET AND DRY CONDITIONS
Sergey Yashchuk
- Speaker at OPTIMAL CONTENT OF ALUMINUM IN ALUMINUM-ZINC ALLOY IN HOT-DIP COATING ON THE STEEL STRIP
Yun Ha Yoo
- Speaker at ANTI-CORROSION PERFORMANCE OF ZnMg AND ZnMgAl-COATED STEELS FOR AUTOMOTIVE APPLICATIONS
Kintak Raymond Yu
- Speaker at A MODELING FRAMEWORK FOR TOP SKIMMING FORMATION IN GALVANIZING BATH
Nicoletta Zacchetti RINA-Centro Sviluppo Materiali SpA
- Speaker at NON STICKING FURNACE ROLLS FOR STEEL PRODUCTS TO IMPROVE SERVICE LIFE AND PRODUCT QUALITY IN CONTINUOUS ANNEALING AND GALVANIZING LINES: PRELIMINARY STUDY ON CHEMICAL INTERACTIONS AND PICKUP MECHANISM
Qi-fug ZHANG
- Speaker at DEVELOPMENT OF ZINC AND ZINC-ALLOY COATED STEEL SHEET IN CHINA
Weimin Zhong
- Speaker at SNOUT TEMPERATURE PREDICTIVE MODEL AND Zn POT THERMAL BALANCE
Edzo Zoestbergen
- Speaker at FEEDING TECHNOLOGY FOR A CONTINUOUS PVD COATING LINE
Marga Zuijderwijk
- Speaker at SIMULATION OF FLASH PRE-OXIDATION IN AN ANNEALING SIMULATOR