Metal Additive Manufacturing Conference - MAMC 2021

3-5 November 2021

Wirtschaftskammer Österreich

Europe/Vienna timezone

Conference Secretary

Speaker List

Mihaela Albu
- Speaker at Correlative microstructure investigations of additive manufactured parts
Sasan Amirabdollahian University of Trento
- Speaker at Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Henrik Andersson Uddeholm AB
- Speaker at Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
Siegfried Arneitz
- Speaker at Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Mikael Åsberg
- Speaker at Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Siegfried Baehr
- Speaker at Cracking behavior of a Zr-blended aluminum 7075 alloy processed by laser-based powder bed fusion under argon and nitrogen and various argon-nitrogen mixtures
Dominik Bauer
- Speaker at Process gas and its influence on additive manufactured AlSi10Mg
Mirnes Berbic
- Speaker at Thermomechanical and thermochemical endurance of hot work tool steels and PVD-coatings for high pressure die casting
Sabine Bodner
- Speaker at The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Marie-Noemi Bold
- Speaker at Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stresses of IN718 Thin-Walled Structures
- Speaker at Investigation of Cooling Rate and Microstructure with the Aim of Alloy Development using Extreme High Speed Laser Material Deposition (EHLA) exemplified by 316L
Efrain Carreño-Morelli
- Speaker at Solvent on Granules 3D-Printing of WC-12Co Cemented Carbide Parts
Stanislav Chernyshikhin
- Speaker at Study on the selective laser melting of aluminum matrix composites reinforced with AlN particles
Juergen Cornelius
- Speaker at A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook
Erik Dartfeldt RISE
- Speaker at Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
Faraz deirmina
- Speaker at Effect of post-processing thermal treatments on fatigue resistance of additively manufactured 18Ni300 maraging steel
- Speaker at Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Timothée Delacroix
- Speaker at Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
Martin Dopler
- Speaker at Energy efficient production of spherical powders for DMLS Applications
Jan Dzugan COMTES FHT Inc.
- Speaker at Characterization of local fracture properties of DED deposited multiple material components
Beatrix Elsner
- Speaker at Topology optimized unit cells for laser powder bed fusion
Leandro Feitosa
- Speaker at Microstructure and mechanical performance of Sandvik Osprey Inconel 625 produced via laser powder bed fusion
Rudolf Gradinger
- Speaker at Integration of electrical conductors into metallic structures by DED technologies
Stefan Griesser
- Speaker at Metal Additive Manufacturing via Powder Layer Fusion Technology
V S Hariharan
- Speaker at Simulation of microstructural evolution during additive manufacturing of Haynes 282
Michael Härtel
- Speaker at Hochfest und korrosionsbeständig mittels AM – Neue Aluminiumwerkstoffe für den industriellen 3D-Druck, ein Beitrag zur ressourceneffizienten Fertigung
Anders Hjermitslev Teknologisk Institut
- Speaker at Creating Competitive Metal AM Production with High Volume and Flexibility Based on Digital Twins
Amir Horr
- Speaker at On Fatigue Analyses of Additive Manufacturing Parts: Review of Hybrid Techniques
Christopher Hulme-Smith
- Speaker at Further development and deployment of powder spreadability testing
Henk Jansen
- Speaker at Serial production of additive manufacturing orthopedic implants using SLM and EBM.
Patrick Köhnen
- Speaker at Computational design of high γ′ nickel-based superalloys for laser powder bed fusion
Thomas Laag
- Speaker at Improvement of part accuracy by combination of pulsed wave (pw) and continuous wave (cw) Laser Powder Bed Fusion
Louis Lemarquis
- Speaker at Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Stefan Leuders
- Speaker at On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
Samuel Lorin Frauenhofer Chalmers Centre
- Speaker at Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
Bakir Mehic University of Applied Sciences Upper Austria
- Speaker at 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
Martina Meisnar Materials & Processes Engineer, European Space Agency
- Speaker at Past and future challenges for Additive Manufacturing in Space Industry
Gerald Mitteramskogler
- Speaker at Lithography-based additive manufacturing of functional metal components
Marco Mitterlehner TU Wien
- Speaker at Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester
Maxwell Moyle
- Speaker at Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Marcel Wolfgang Mueller
- Speaker at Investigation of microstructure and cracking prevention of M4 HSS processed by selective laser melting
Anton Nalivaiko
- Speaker at Study on the selective laser melting of aluminum matrix composites reinforced with AlN particles
Erich Neubauer
- Speaker at Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Wouter Nuyts
- Speaker at Maximum overhang on WAAM parts without part manipulation and the effect on path planning
Niall O'Dowd
- Speaker at Exploring the Detection Limits of Powder Bed Defects Using a Structured Light Monitoring System For Powder Bed Fusion Additive Manufacturing
David Ohlsson RISE
- Speaker at Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
Christos Oikonomou
- Speaker at Prediction of residual stress development and subsequent spring back deformation, using multiple simulation methods and a comprehensive experimental verification- and validation method.
Dmityrii Ozherelkov
- Speaker at Study on the selective laser melting of aluminum matrix composites reinforced with AlN particles
Laurent Pambaguian Materials & Processes Engineer, European Space Agency
- Speaker at Past and future challenges for Additive Manufacturing in Space Industry
Jan Platl
- Speaker at Crack Mechanism Analysis of a Laser Powder Bed Fused Carbon-Free FeCoMo Alloy
Laurenz Plöchl
- Speaker at Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V
QUENTIN POUILLE
- Speaker at Integration of optical fibers in parts resulting from additive metal fabrication processes
Lucas Robatto Instituto Tecnológico de Aeronáutica
- Speaker at Residual stress heterogeneity induced by SLM of carburizing steel 20MnCr5 and its influence on contact fatigue
Moritz Roscher
- Speaker at Development of Al-Ni based alloys for Laser Powder Bed Fusion
Jasmin Saewe Fraunhofer Institut für Lasertechnik
- Speaker at Processing elemental powder blends with miniaturized process chamber designed for material development with laser powder bed fusion
Uday Singh
- Speaker at ICME-based approach to correlate residual stress generation with micro-structural evolution and solidification cracking during laser powder bed fusion process
Robert Steinlechner
- Speaker at LB-PBF processing limits for Cr-Mn-Mo low alloy structural steels
Zhongji Sun
- Speaker at Residual stress quantification for additively manufactured aluminium samples via laser-powder bed fusion
Emilie H. Valente Technical University of Denmark
- Speaker at New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Jaroslav Vavřík
- Speaker at Mechanical properties of Additively manufactured builds from maraging steel
Maximilian Voshage
- Speaker at Zinc-Magnesium Alloys for Bioresorbable Medical Implants manufactured by Laser Powder Bed Fusion
Yannik Wilkens
- Speaker at Intelligent powder production: Data-driven optimization of productivity
Quanren Zeng National Manufacturing Institute Scotland, University of Strathclyde
- Speaker at Process modelling and realization for laser-metal powder additive manufacturing