Metal Additive Manufacturing Conference - MAMC 2022

Name: Metal Additive Manufacturing Conference - MAMC 2022
Start: 2022-09-26T08:00:00+02:00
End: 2022-09-28T18:00:00+02:00
Location: TU Graz

26-28 September 2022

TU Graz

Europe/Vienna timezone

Conference Secretary

Author List

Aurelie Achille Faurecia Caligny Material engineering manager/ Heat treatment Expert
- Author in Additive Manufacturing challenges in Fine Blanking at Faurecia Seating
Mihaela Albu Graz Centre for Electron Microscopy
- Author in Advanced microstructure investigations of metallic 3D-printed parts
Sergio Amancio-Filho Graz University of Technology, IMAT - Institute for Materials Science, Joining and Forming, BMK Endowed Professorship for Aviation
- Author in Mechanical Properties of a Zirconium and Tungsten Carbide modified Al-Mg-Sc-Zr alloy (AA5024) processed by Laser Powder Bed Fusion (L-PBF)
- Co-author in Laser powder bed fusion of Ni-rich NiTi by in situ alloying: an exploratory study on the printing of defect-free parts
- Co-author in Wire-based electron beam additive manufacturing of Ni-rich NiTi Shape Memory Alloy
Enrique Ariza-Galvan RHP-Technology GmbH
- Author in Study on processing of large scale magnesium alloy AZ91 component manufactured by Plasma Metal Deposition (PMD®) for space applications
Siegfried Arneitz Graz University of Technology, IMAT - Institute for Materials Science, Joining and Forming, 1.a) BMK Endowed Professorship for Aviation, Materials Group
- Author in Mechanical Properties of a Zirconium and Tungsten Carbide modified Al-Mg-Sc-Zr alloy (AA5024) processed by Laser Powder Bed Fusion (L-PBF)
Siegfried Arneitz Institute of Materials Science, Joining and Forming, Graz University of Technology
- Author in AM of the Fe-Cr-Co alloy system: Using the in- situ alloying process to manufacture magnetic parts with a defined chemical gradient
- Co-author in Laser powder bed fusion of Ni-rich NiTi by in situ alloying: an exploratory study on the printing of defect-free parts
Christin Aumayr voestalpine Böhler Edelstahl GmbH & Co KG
- Author in Thermophysical property measurement to support additive manufacturing
Ľuboš Bača Aerospace & Advanced Composites GmbH
- Co-author in Study on processing of large scale magnesium alloy AZ91 component manufactured by Plasma Metal Deposition (PMD®) for space applications
Mimmi Bäck OKG
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Priyanshu Bajaj m4p material solutions GmbH
- Author in Steels for Additive Manufacturing - looking at the Oil and Gas industry
Michael Benoit The University of British Columbia
- Co-author in Investigations of Plasma Metal Deposition (PMD) of 6061 and 7075 aluminum alloys for aerospace and automotive applications
Eleonora Bettini SANDVIK ADDITIVE MANUFACTURING
- Co-author in Development of Cobalt Free Maraging Steels for Additive Manufacturing
Martin Bielik
- Author in Investigations of Plasma Metal Deposition (PMD) of 6061 and 7075 aluminum alloys for aerospace and automotive applications
Benedikt Blitz SMR Premium GmbH
- Author in 'What's ahead for remelted Tool steels and update on PM & AM Tool steels'
Mário Boccalini Institute for Technological Research
- Author in Mechanical behavior of additive manufactured Nb-Ti and Ti-Nb-Zr alloys using plasma atomized and HDH powders
Marie-Noemi Bold RWTH Aachen University - DAP
- Author in Application of the 3D-EHLA process for agile alloy development
Alberto Bordin ASTM International
- Author in Best Practices to Implement a Part Family Certification Approach for Aviation
Carlos Botero Mid Sweden University
- Author in Electron Beam Based Additive Manufacturing of Highly Alloyed Tool Steels and Tungsten Carbide Metal Matrix Composites: - From Research to Industrialization -
Ricardo Buzolin Graz University of Technology
- Author in AM of the Fe-Cr-Co alloy system: Using the in- situ alloying process to manufacture magnetic parts with a defined chemical gradient
Simon Chan The University of Auckland, New Zealand
- Author in A cost-effective hybrid approach for the manufacturing of a high-performance injection mould inserts using the laser-powder-bed-fusion process
Tomasz Choma Warsaw University of Technology Faculty of Materials Science and Engineering
- Co-author in Ultrasonic atomization of Fe-based soft magnetic alloys
Katarzyna Ciosek Högström Forsmark
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
claude Colasse
- Author in Additive Manufacturing challenges in Fine Blanking at Faurecia Seating
Paul Davies Sandvik Additive Manufacturing
- Author in Development of Cobalt Free Maraging Steels for Additive Manufacturing
Faraz Deirmina Siemens energy
- Author in Effect of minor alloying additions on the stress-rupture properties of a modified Hastelloy X fabricated by additive manufacturing
- Author in Effects of layer thickness and laser energy input on the solution annealing behavior of a laser powder bed fusion processed 316L stainless steel
Anna Delblanc Sandvik Materials Technology
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Olaf Diegel The University of Auckland, New Zealand
- Co-author in A cost-effective hybrid approach for the manufacturing of a high-performance injection mould inserts using the laser-powder-bed-fusion process
Nikhil Dixit Sandvik Additive Manufacturing
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Martin Dopler hightech metal Prozessentwicklungsgesellschaft mbH
- Author in Copper Alloys for Additive Manufacturing Processes
Hugo Drexler Junior Scientist
- Author in On Reduced and Detailed Simulations of Additive Manufacturing Processes
Yvonne Dworak
- Author in A toolbox towards first-time-right production in powder bed fusion
Mark Easton Royal Melbourne Institute of Technology
- Co-author in Investigations of Plasma Metal Deposition (PMD) of 6061 and 7075 aluminum alloys for aerospace and automotive applications
Pedro Effertz Graz University of Technology
- Author in Application of Machine Learning for Process Control in AM - A case study for L-PBF
Pal Efsing Ringhals
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Norbert Enzinger IMAT / TUGraz
- Author in 3DWelding - Additive Fabrication of Structural Steel Elements
- Co-author in Hybrid cast and wire arc additive manufacturing of an aluminium component for the automotive industry
Fredrik Falkenberg Alfa Laval Technologies AB
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Evelin Fissltahler Graz Centre for electron Microscopy
- Author in Advanced microstructure investigations of metallic 3D-printed parts
Jesper Flyg Swerim AB
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Björn Forssgren Ringhals
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Sebastian Fritsche
- Author in 3DWelding - Additive Fabrication of Structural Steel Elements
Alexander Fröhlich TU Chemnitz
- Co-author in Novel process approach for additive manufacturing using inductive wire melting by forced droplet detachment
Núria Fuertes Casals Swerim AB
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Carsten Gachot TU Wien
- Co-author in Microstructural design of self-lubricating metals for forming processes and aerospace applications using laser metal deposition (invited)
Sara Garmendia Alustiza Mondragon University
- Author in Enhanced cooling by conformal cooling of additively manufactured wire drawing tools made of cemented carbides
Cédric Georges CRM group
- Co-author in Printing and repair of AA7xxx components with a novel Al composition using Laser Metal Deposition
Peter Gillberg CURTISS-WRIGHT
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Christopher Gottlieb Klingaa Danish Technological Institute
- Co-author in Rapid material multi-parameter optimization for small scale series productions in PBF-LB/M
Rudolf Gradinger LKR Leichtmetallkompetenzzentrum Ranshofen GmbH
- Author in Investigations into the robustness of additively manufactured, embedded electrical conductors
Eva Maria Graf Graz University of Technology, IMAT - Institute for Materials Science, Joining and Forming, BMK Endowed Professorship for Aviation
- Co-author in Laser powder bed fusion of Ni-rich NiTi by in situ alloying: an exploratory study on the printing of defect-free parts
Manuel Grubhofer Incus GmbH
- Co-author in Lithography-based Metal Manufacturing: Technique, Materials & Applications
Harald Gschiel voestalpine BÖHLER Edelstahl GmbH & Co KG
- Author in Thermophysical property measurement to support additive manufacturing
Lasse Haahr-Lillevang Danish Technological Institute
- Author in Rapid material multi-parameter optimization for small scale series productions in PBF-LB/M
Franz Haas Institute of Production Engineering, Graz University of Technology
- Author in Functional prototype for the validation of the innovative metal additive manufacturing SLEDM process
- Co-author in New calculation software for analytic support structure optimization in metal additive manufacturing
Georg Haberfehlner FELMI, TU Graz
- Author in Advanced microstructure investigations of metallic 3D-printed parts
György Attila Harakály Incus GmbH
- Author in Lithography-based Metal Manufacturing: Technique, Materials & Applications
Peter Harlin Sandvik Additive Manufacturing
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Kai Hilgenberg Bundesanstalt für Materialforschung und –prüfung (BAM)
- Co-author in Concepts for bridging voids in Metal Additive Manufacturing for repair of gas turbine blades using Laser Powder Bed Fusion
Anders Hjermitslev Teknologisk Institut
- Co-author in Rapid material multi-parameter optimization for small scale series productions in PBF-LB/M
Christian Höller AVL List GmbH
- Co-author in Additive Manufacturing for Advanced Automotive Measurement Systems - Opportunities & Challenges
Christoph Holzinger
- Author in 3DWelding - Additive Fabrication of Structural Steel Elements
Amir Horr senior Scientist
- Author in On Reduced and Detailed Simulations of Additive Manufacturing Processes
- Co-author in Investigations of Plasma Metal Deposition (PMD) of 6061 and 7075 aluminum alloys for aerospace and automotive applications
Eduard Hryha Chalmers University of Technology/Centre for Additive Manufacturing - Metal (CAM2)
- Author in Powder for Metal Additive Manufacturing: Properties and degradation
Christopher Hulme-Smith KTH Royal Institute of Technology
- Author in Comparison of Novel Powder Spredability Test and Established Flowability Metrics
Zoran Ignjatov RUAG Space GmbH
- Co-author in Study on processing of large scale magnesium alloy AZ91 component manufactured by Plasma Metal Deposition (PMD®) for space applications
Mahdi Jamshidinia ASTM International
- Co-author in Best Practices to Implement a Part Family Certification Approach for Aviation
Norberto Jimenez Mena CRM group
- Author in Printing and repair of AA7xxx components with a novel Al composition using Laser Metal Deposition
Hanna Johansson Forsmark
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Lorenz John forty2 Technologies GmbH
- Author in Application of Machine Learning for Process Control in AM - A case study for L-PBF
Mattias Jonsson Coudret OKG
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Reinhard Kaindl JOANNEUM RESEARCH Forschungsgesellschaft mbH
- Author in High Temperature Tensile Strength of Ti6Al4V Processed by L-PBF – Influence of Heat Treatment, Microstrucutre and Powder Reuse
Bastian Kallenbach m4p material solutions GmbH Austria
- Author in Clean and reliable metal powders – a statistical approach
Stefan Karanovic AVL List GmbH
- Author in Additive Manufacturing for Advanced Automotive Measurement Systems - Opportunities & Challenges
Oskar Karlsson Swerim AB
- Author in Effects of layer thickness and laser energy input on the solution annealing behavior of a laser powder bed fusion processed 316L stainless steel
Patrik Karlsson
- Author in Enhanced cooling by conformal cooling of additively manufactured wire drawing tools made of cemented carbides
Jonas Kimme TU Chemnitz
- Author in Novel process approach for additive manufacturing using inductive wire melting by forced droplet detachment
Michael Kitzmantel RHP-Technology GmbH
- Co-author in Investigations of Plasma Metal Deposition (PMD) of 6061 and 7075 aluminum alloys for aerospace and automotive applications
Siegfried Kleber voestalpine BÖHLER Edelstahl GmbH & Co KG
- Author in Thermophysical property measurement to support additive manufacturing
Daniel Klint Alfa Laval Technologies AB
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Andreas Klug AVL List GmbH
- Author in Additive Manufacturing for Advanced Automotive Measurement Systems - Opportunities & Challenges
Tim Knobloch Bundesanstalt für Materialforschung und –prüfung (BAM)
- Co-author in Concepts for bridging voids in Metal Additive Manufacturing for repair of gas turbine blades using Laser Powder Bed Fusion
Slawomir Koenig Siemens Energy
- Author in Effect of minor alloying additions on the stress-rupture properties of a modified Hastelloy X fabricated by additive manufacturing
Verena Kräusel TU Chemnitz
- Co-author in Novel process approach for additive manufacturing using inductive wire melting by forced droplet detachment
Martin Kroll TU Chemnitz
- Co-author in Novel process approach for additive manufacturing using inductive wire melting by forced droplet detachment
Henrik Kruse RWTH Aachen University Chair Digital Additive Production DAP
- Author in Mechanical behavior and anisotropy of material properties of additively manufactured lattice structures
Agata Kulig
- Author in Surface refinement of additively manufactured components: microstructure and mechanical properties
Joakim Larsson Örebro University
- Author in Enhanced cooling by conformal cooling of additively manufactured wire drawing tools made of cemented carbides
Thomas Leitner voestalpine BÖHLER Edelstahl GmbH & Co KG
- Author in Thermophysical property measurement to support additive manufacturing
Marcin Leonowicz Warsaw University of Technology Faculty of Materials Science and Engineering
- Co-author in Ultrasonic atomization of Fe-based soft magnetic alloys
Stefan Lintner Graz University of Technology, IMAT - Institute for Materials Science, Joining and Forming, 1.a) BMK Endowed Professorship for Aviation, Materials Group
- Author in Mechanical Properties of a Zirconium and Tungsten Carbide modified Al-Mg-Sc-Zr alloy (AA5024) processed by Laser Powder Bed Fusion (L-PBF)
Tim Gerrit Lücke
- Author in Influence of laser power and scanning speed on the formation of hot cracks during the processing of high-speed steel HS2.2.2 by laser powder bed fusion
Kambiz Mehrabi AVL List GmbH
- Co-author in Hybrid cast and wire arc additive manufacturing of an aluminium component for the automotive industry
Benjamin Meier Joanneum Research Forschungsgmbh
- Author in High Temperature Tensile Strength of Ti6Al4V Processed by L-PBF – Influence of Heat Treatment, Microstrucutre and Powder Reuse
Patrick Meinhardt m4p material solutions GmbH
- Author in Clean and reliable metal powders – a statistical approach
Pelle Mellin Swerim AB
- Author in Comparison of Novel Powder Spredability Test and Established Flowability Metrics
Benjamin Merz
- Author in Concepts for bridging voids in Metal Additive Manufacturing for repair of gas turbine blades using Laser Powder Bed Fusion
Lisa Minkowitz Technische Universität Graz
- Author in Mechanical Properties of a Zirconium and Tungsten Carbide modified Al-Mg-Sc-Zr alloy (AA5024) processed by Laser Powder Bed Fusion (L-PBF)
Stefan Mitsche FELMI, TU Graz
- Author in Advanced microstructure investigations of metallic 3D-printed parts
Gerlad Mitteramskogler Incus GmbH
- Co-author in Lithography-based Metal Manufacturing: Technique, Materials & Applications
Ellen M. J. Hedegaard Danish Technological Institute
- Co-author in Rapid material multi-parameter optimization for small scale series productions in PBF-LB/M
Denise Mödder Incus GmbH
- Co-author in Lithography-based Metal Manufacturing: Technique, Materials & Applications
Bartosz Morończyk Warsaw University of Technology Materials Science and Engineering Division
- Author in Ultrasonic atomization of Fe-based soft magnetic alloys
Sara Munktell Swerim AB
- Author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Erich Neubauer RHP Technology GmbH
- Co-author in Investigations of Plasma Metal Deposition (PMD) of 6061 and 7075 aluminum alloys for aerospace and automotive applications
- Co-author in Study on processing of large scale magnesium alloy AZ91 component manufactured by Plasma Metal Deposition (PMD®) for space applications
Andrew Norman ESA-Estec
- Co-author in Printing and repair of AA7xxx components with a novel Al composition using Laser Metal Deposition
Nicolas Nutal CRM Group
- Co-author in Printing and repair of AA7xxx components with a novel Al composition using Laser Metal Deposition
Christos Oikonomou Uddeholms AB
- Author in Innovative solutions for High Pressure Die Casting Tooling Applications via Laser Powder Bed Fusion processing and performance evaluation of X35CrMoV5-2 Tool Steel
Nagore Otegi Mondragon University
- Author in Enhanced cooling by conformal cooling of additively manufactured wire drawing tools made of cemented carbides
Rafael Paiotti Marcondes Guimaraes TU Graz
- Author in Laser powder bed fusion of Ni-rich NiTi by in situ alloying: an exploratory study on the printing of defect-free parts
- Author in Wire-based electron beam additive manufacturing of Ni-rich NiTi Shape Memory Alloy
Laurent Pambaguian ESTEC-ESA
- Co-author in Study on processing of large scale magnesium alloy AZ91 component manufactured by Plasma Metal Deposition (PMD®) for space applications
Andreas Pelz
- Author in Clean and reliable metal powders – a statistical approach
- Co-author in Steels for Additive Manufacturing - looking at the Oil and Gas industry
Stefan Peters
- Author in 3DWelding - Additive Fabrication of Structural Steel Elements
Tobias Pichler Fraunhofer Institute for Laser Technology ILT
- Author in Adaptive Process Control for Laser Powder Bed Fusion
Florian Pixner Graz University of Technology, IMAT - Institute for Materials Science, Joining and Forming, Joining Technology
- Co-author in Wire-based electron beam additive manufacturing of Ni-rich NiTi Shape Memory Alloy
Christian Potzernheim-Zenkel voestalpine Automotive Components Dettingen GmbH & Co KG
- Author in Optimization of a Casted Part in 3D Sand Printing in Comparison to other AM Technologies
Carsten Putz
- Author in Variant flexible Hairpin Stator (E-Motor) Production through Parametric Modeling and Additive Tooling
Peter Quitta forty2 Technologies GmbH
- Author in Application of Machine Learning for Process Control in AM - A case study for L-PBF
Karl Radlmayr voestalpine Metal Forming GmbH
- Author in Optimization of a Casted Part in 3D Sand Printing in Comparison to other AM Technologies
Antonio Ramirez The Ohio State University, Department of Materials Science and Engineering
- Co-author in Wire-based electron beam additive manufacturing of Ni-rich NiTi Shape Memory Alloy
Markus Ramsperger
- Author in Electron Beam Based Additive Manufacturing of Highly Alloyed Tool Steels and Tungsten Carbide Metal Matrix Composites: - From Research to Industrialization -
Karin Ratschbacher GfE Metalle und Materialien GmbH
- Author in Production routes for spezialized powders
Bettina Rauchdobler Graz University of Technology, IMAT - Institute for Materials Science, Joining and Forming, BMK Endowed Professorship for Aviation
- Co-author in Wire-based electron beam additive manufacturing of Ni-rich NiTi Shape Memory Alloy
Gregor Reinalter
- Author in Hybrid cast and wire arc additive manufacturing of an aluminium component for the automotive industry
Christian Repitsch m4p material solutions GmbH
- Author in Aluminum powders beyond standard applications
- Co-author in Steels for Additive Manufacturing - looking at the Oil and Gas industry
Sophie Rivoirard CNRS Néel
- Author in AM of the Fe-Cr-Co alloy system: Using the in- situ alloying process to manufacture magnetic parts with a defined chemical gradient
Manel Rodriguez Ripoll AC2T research GmbH
- Author in Microstructural design of self-lubricating metals for forming processes and aerospace applications using laser metal deposition (invited)
Kamran Saeidi Siemens Energy
- Author in Effects of layer thickness and laser energy input on the solution annealing behavior of a laser powder bed fusion processed 316L stainless steel
Jasmin Saewe Fraunhofer Institut für Lasertechnik
- Author in Acceleration of the LPBF process
- Co-author in Influence of laser power and scanning speed on the formation of hot cracks during the processing of high-speed steel HS2.2.2 by laser powder bed fusion
Johannes Henrich Schleifenbaum Chair of Digital Additive Production - RWTH Aachen University
- Author in Variant flexible Hairpin Stator (E-Motor) Production through Parametric Modeling and Additive Tooling
Johannes Henrich Schleifenbaum RWTH Aachen University - DAP
- Author in Application of the 3D-EHLA process for agile alloy development
Nico Schmitt RWTH Aachen University - DAP
- Author in Application of the 3D-EHLA process for agile alloy development
Martin Schmitz-Niederau voestalpine Böhler Welding Germany GmbH
- Author in Optimization of a Casted Part in 3D Sand Printing in Comparison to other AM Technologies
Martin Schnall LKR Leichtmetallkompetenzzentrum Ranshofen
- Co-author in Study on processing of large scale magnesium alloy AZ91 component manufactured by Plasma Metal Deposition (PMD®) for space applications
Hartmuth Schröttner FELMI, TU Graz
- Author in Advanced microstructure investigations of metallic 3D-printed parts
Luke Schüller Fraunhofer Institut für Lasertechnik
- Co-author in Influence of laser power and scanning speed on the formation of hot cracks during the processing of high-speed steel HS2.2.2 by laser powder bed fusion
Stefan Seidel CTO - Pankl Racing Systems AG
- Author in Additive Manufacturing – a game-changer in Automotive engineering
Mohsen Seifi ASTM International
- Co-author in Best Practices to Implement a Part Family Certification Approach for Aviation
Saham Sadat Sharifi Technical University of Graz
- Author in 3DWelding - Additive Fabrication of Structural Steel Elements
James Shipley Quintus Technologies AB
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Sebastian Sivertsen Uddeholms AB
- Author in Innovative solutions for High Pressure Die Casting Tooling Applications via Laser Powder Bed Fusion processing and performance evaluation of X35CrMoV5-2 Tool Steel
Kirstie Snodderly ASTM International
- Co-author in Best Practices to Implement a Part Family Certification Approach for Aviation
Christof Sommitsch Graz University of Technology
- Author in AM of the Fe-Cr-Co alloy system: Using the in- situ alloying process to manufacture magnetic parts with a defined chemical gradient
- Author in High Temperature Tensile Strength of Ti6Al4V Processed by L-PBF – Influence of Heat Treatment, Microstrucutre and Powder Reuse
Jörg Steiner voestalpine Giesserei Linz GmbH
- Author in Optimization of a Casted Part in 3D Sand Printing in Comparison to other AM Technologies
Nils Stelzer Aerospace & Advanced Composites GmbH
- Co-author in Study on processing of large scale magnesium alloy AZ91 component manufactured by Plasma Metal Deposition (PMD®) for space applications
Martin Stockinger Montanuniversität Leoben
- Co-author in Hybrid cast and wire arc additive manufacturing of an aluminium component for the automotive industry
Raphael Tiefnig Herr
- Author in New calculation software for analytic support structure optimization in metal additive manufacturing
- Co-author in Functional prototype for the validation of the innovative metal additive manufacturing SLEDM process
Hector Torres AC2T research GmbH
- Author in Microstructural design of self-lubricating metals for forming processes and aerospace applications using laser metal deposition (invited)
Gregor Trimmel Graz University of Technology, ICTM - Institute for Chemistry and Technology of Materials
- Co-author in Wire-based electron beam additive manufacturing of Ni-rich NiTi Shape Memory Alloy
Andreas Trummer
- Author in 3DWelding - Additive Fabrication of Structural Steel Elements
Christoph Turk voestalpine Böhler Edelstahl GmbH & Co KG
- Author in Thermophysical property measurement to support additive manufacturing
Markus Uhlirsch
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Per Waernqvist Ringhals
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Alexander Walzl DISTECH Disruptive Technologies GmbH
- Co-author in Copper Alloys for Additive Manufacturing Processes
Fernando Warchomicka IMAT Institute of Material Science, Joining and Forming, University of Technology – Graz, Kopernikusgasse 24/1,
- Author in High Temperature Tensile Strength of Ti6Al4V Processed by L-PBF – Influence of Heat Treatment, Microstrucutre and Powder Reuse
Martin White ASTM International
- Co-author in Best Practices to Implement a Part Family Certification Approach for Aviation
Leyla Wickström Swerim AB
- Co-author in Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Armin Wiedenegger voestalpine Additive Manufacturing Center
- Author in AM in tooling – Much more than conformal cooling
Manuel Wiltsche AVL List GmbH
- Co-author in Additive Manufacturing for Advanced Automotive Measurement Systems - Opportunities & Challenges
Rafał Wróblewski Warsaw University of Technology Faculty of Materials Science and Engineering
- Co-author in Ultrasonic atomization of Fe-based soft magnetic alloys
Xun Xu The University of Auckland, New Zealand
- Co-author in A cost-effective hybrid approach for the manufacturing of a high-performance injection mould inserts using the laser-powder-bed-fusion process
Jonas Zielinski Digital Additive Production RWTH Aachen University
- Author in Mechanical behavior and anisotropy of material properties of additively manufactured lattice structures
Łukasz Żrodowski AMAZEMET Sp. z o.o. [Ltd]
- Co-author in Ultrasonic atomization of Fe-based soft magnetic alloys